'l'
`
`(3 (J I. 55
`
`FflsIHr(
`
`III
`
`I l.
`
`INTERNATIONAL
`
`12': Y|=AI:Is=.
`
`|—|I.— !r\n\||—|\/A'r||—n\|
`
`MEGCO
`
`Ex1024
`
`
`
`MEGCO Ex. 1024
`
`

`
`Composite Plugs
`
` Downhole Isolation Tools - Multi-Stage Operations
`
`Index
`Index
`
`Rapid Mill™ Ball Drop .......................................................................................................................................1-2
`Rapid Mill™ Flo-Back Flapper ..........................................................................................................................3-4
`Magnum Series™ (Ball Drop, Bridge, Flo-Back, Flo-Back with Bio-Ball) .........................................................5-6
`Mill E-Z™ Series (Ball Drop, Bridge, Flo-Back, Flo-Back with Bio-Ball) .........................................................7-10
`Mill E-Z™ Pump-Down Plugs .........................................................................................................................11-14
`Snub Nose™ Plugs (Ball Drop, Bridge, Flo-Back, Flo-Back with Bio-Ball) ..................................................15-16
`Long Range™ Plugs (Ball Drop, Bridge, Flo-Back, Flo-Back with Bio-Ball) ................................................17-18
`
`Bio-Ball - Specifications & Instructions .............................................................................................................. 19
`Installation Instructions ......................................................................................................................................20
`Recommended Running & Drilling Procedures ........................................................................................... 21-23
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`
`MEGCO Ex. 1024
`
`

`
`Rapid Mill™
`
` Ball Drop Frac Plug
`
`InnovatIon revealed
`InnovatIon revealed
`
`The RAPID MILL™ composite frac plug uses a ball drop procedure to isolate hydrocarbon
`formations for multi-stage frac operations. Mostly used for horizontal operations, the slim
`lightweight design makes deployment fast and efficient in vertical or horizontal wells.
`After setting, the Rapid Mill™ remains open for fluid flow and allows wireline services to
`continue until the ball drop isolation procedure has started. Once the surface-dropped
`ball is pumped down and seated in to the inner funnel top of the tool, the operator can
`pressure up against the plug to achieve isolation. Comprised of proprietary composite
`material and having a low metallic content, the Rapid Mill™ can be quickly and easily
`milled and circulated back to surface using conventional milling, drilling with a rig and
`tubing, or with coiled tubing.
`
`Features
`Features
`
`a No tungsten carbide buttons
`or aluminum!
`a Composite mandrel aids in fast
`drill-outs and time saved.
`a Consistent drill times of 30 minutes
`or less
`a Can be deployed on wireline, coiled
`tubing, tubing or drill pipe
`a Designed for horizontal or vertical
`wells
`a Dependable cast iron slips secure
`plug in place
`
`a Unique pump down element design
`requires less fluid and pump pressure
`to deploy plug horizontally
`a Setting is done via a universal setting
`sleeve and adapter.
`a Positive lock-up feature to ensure
`lockup of multiple plugs in a single
`wellbore
`a Custom O.D. available upon request
`a Patent Pending
`
`Pump Down Wipers
`Available for
`Horizontal Applications
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 1
`
`MEGCO Ex. 1024
`
`

`
`Rapid Mill™
`
` Ball Drop Frac Plug
`
`ContInued
`ContInued
`
`O.D.
`inch
`(mm)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`mAx iD
`inch
`(mm)
`
`9.50-11.00
`(14.1-16.4)
`9.50-13.5
`(14.1-20.1)
`15.10-17.10
`(22.5-25.4)
`11.50-18.00
`(17.1-26.8)
`
`14.00
`(20.8)
`
`3.476
`(88.3)
`3.920
`(99.6)
`3.754
`(95.4)
`4.276
`(108.6)
`
`5.012
`(127.3)
`
`3.548
`(90.1)
`4.090
`(103.9)
`3.826
`(97.2)
`4.560
`(115.8)
`
`5.012
`(127.3)
`
`O.D.
`inch
`(mm)
`
`3.188
`(81.0)
`3.570
`(90.7)
`3.440
`(87.4)
`3.920
`(99.6)
`
`4.600
`(116.8)
`
`15.50-23.00
`(23.1-34.2)
`
`4.670
`(118.6)
`
`4.95
`(125.7)
`
`4.300
`(109.2)
`
`Plug sPecs
`bAll
`size
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`i.D.
`inch
`(mm)
`
`OPerAting rAnges
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`24.0
`(609.6)
`
`0.630
`(16.0)
`
`1.130
`(28.7)
`
`1.5
`(38.1)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`2.125
`(54.0)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`250°F
`10K PSI
`(121ºC)
`(68.9MPa)
`Yellow
`Composite/
`HSN
`Elastomer
`
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 2
`
`MEGCO Ex. 1024
`
`

`
`Rapid Mill™
`
`Flo-Back Flapper Isolation Frac Plug
`
`InnovatIon revealed
`InnovatIon revealed
`
`The RAPID MILL™ Flo-Back Flapper composite frac plug is used to isolate hydrocarbon
`formations for multi-stage frac operations. The slim lightweight design makes deployment
`fast and efficient in vertical or horizontal wells. Once the Rapid Mill™ Flo-Back Flapper
`is set, the flapper closes, allowing frac or perf operations above the tool to commence.
`After operations are complete, topside pressure is released and flow is allowed through
`the one-way opening. Comprised of proprietary composite material and having a low
`metallic content, the Rapid Mill™ can be quickly and easily milled and circulated back
`to surface using conventional milling, drilling with a rig and tubing, or with coiled tubing.
`
`Features
`Features
`
`a No tungsten carbide buttons, and
`no aluminum!
`a Consistent drill times of 30 minutes
`or less
`a Can be deployed on wireline, coiled
`tubing, tubing or drill pipe
`a Flapper spring mechanism is built for
`horizontal or vertical wells
`a Dependable cast iron slips secure
`plug in place
`
`a Unique pump down element design
`requires less fluid and pump pressure
`to deploy plug horizontally
`a Setting is done via a universal setting
`sleeve and adapter.
`a Positive lock-up feature to ensure
`lockup of multiple plugs in a single
`wellbore
`a Custom O.D. available upon request
`a Patent Pending
`
`Pump Down Wipers
`Available for
`Horizontal Applications
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 3
`
`MEGCO Ex. 1024
`
`

`
`Rapid Mill™
`
`Flo-Back Flapper Isolation Frac Plug
`
`ContInued
`ContInued
`
`O.D.
`inch
`(mm)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`mAx iD
`inch
`(mm)
`
`9.50-11.00
`(14.1-16.4)
`9.50-13.5
`(14.1-20.1)
`15.10-17.10
`(22.5-25.4)
`11.50-18.00
`(17.1-26.8)
`
`14.00
`(20.8)
`
`3.476
`(88.3)
`3.920
`(99.6)
`3.754
`(95.4)
`4.276
`(108.6)
`
`5.012
`(127.3)
`
`3.548
`(90.1)
`4.090
`(103.9)
`3.826
`(97.2)
`4.560
`(115.8)
`
`5.012
`(127.3)
`
`O.D.
`inch
`(mm)
`
`3.188
`(81.0)
`3.570
`(90.7)
`3.440
`(87.4)
`3.920
`(99.6)
`
`4.600
`(116.8)
`
`15.50-23.00
`(23.1-34.2)
`
`4.670
`(118.6)
`
`4.95
`(125.7)
`
`4.300
`(109.2)
`
`Plug sPecs
`
`OPerAting rAnges
`
`i.D.
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`24.0
`(609.6)
`
`0.630
`(16.0)
`
`1.130
`(28.7)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`250°F
`10K PSI
`(121ºC)
`(68.9MPa)
`Yellow
`Composite/
`HSN
`Elastomer
`
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 4
`
`MEGCO Ex. 1024
`
`

`
`Magnum Series™
`
` Multi-Configuration Plugs
` Multi-Stage Operations
`InnovatIon revealed
`InnovatIon revealed
`
`isolate multi-stage
`is a multi-configuration plug used to temporarily
`The “MAGNUM”
`vertical or horizontal completion operations. The base model of the Magnum Series™
`is a ball drop configuration. When combined with three additional on-the-fly
`inserts
`(Bridge Plug, Flo-Back, or Flo-Back with Bio-Ball), this tool provides the service company with
`optimum on-site versatility. Comprised of proprietary composite material and having a low metallic
`content, the MAGNUM Series™ can be quickly and easily milled and circulated back to surface.
`
`Ball Drop
`
`Bridge
`
`Flo-Back
`
`Flo-Back
`w/ Bio-Ball
`Magnum Ball Drop: After setting, the tool remains open for fluid flow and allows wireline services
`to continue until the ball drop isolation procedure has started. Once the surface-dropped ball
`is pumped down and seated in to the inner funnel top of the tool, the operator can pressure up
`against the plug to achieve isolation.
`Magnum Bridge: The Bridge Plug, or “Kill Plug”, has a “top venting” ability, which allows for upper
`and lower equalization during drill out.
`Magnum Flo-Back: When the pressure below the plug is greater than the pressure above, the
`one-way check valve will allow the two zones to commingle. The operator can independently treat
`or test each zone and then remove the flo-back plug(s) in one trip with conventional milling or
`drilling tools.
`Magnum Flo-Back with Bio-Ball: Also built with a one-way check valve, this plug temporarily
`prevents sand from invading the upper zone and eliminates cross-flow problems by utilizing an
`Aqueous-Soluble Bio-Ball sealer. After the Bio-Ball has been dissolved by pressure, temperature, or
`fluid, the check valve will allow the two zones to commingle. The operator can then independently
`treat or test each zone and remove the flo-back plug(s) in an under-balanced environment in one trip.
`
`Features
`Features
`
`a Consistent drill times of 30 minutes
`or less
`a Can be set on wireline, coiled
`tubing, or production tubing using
`conventional setting tools
`a Can be milled or drilled with coiled
`tubing or a rig
`a Millable cast iron slips
`a High differential pressure rating
`a “Top Venting” Bridge configuration
`allows for upper & lower equalization
`during drill outs.
`a Positive lock-up feature to ensure
`plugs do not spin while milling
`
`a Low temp and high temp materials
`conducive to a wide range of
`environments
`a Utilizes conventional setting tools
`a Patented precision shearing device
`a Setting is done via a universal setting
`sleeve and adapter.
`a Unique pump down element design
`requires less fluid and pump pressure
`to deploy plug horizontally
`a Custom O.D. plugs are available
`upon request
`a Patent Pending
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 5
`
`Pump Down Wipers
`Available for
`Horizontal Applications
`
`MEGCO Ex. 1024
`
`

`
`Magnum Series™
`
` Multi-Configuration Plugs
` Multi-Stage Operations
`
`ContInued
`ContInued
`
`Ball
`Drop
`
`Bridge
`Plug
`
`Flo-Back
`
`Flo-Back
`with Bio-Ball
`
`cAsing sPecs
`
`O.D.
`inch
`(mm)
`
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`Plug sPecs
`FlOW
`bAck
`min
`i.D.
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`bAll
`DrOP
`min
`i.D.
`inch
`(mm)
`
`bAll
`size
`inch
`(mm)
`
`OPerAting rAnges
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`2-7/8
`(73.0)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`2.150
`2.441
`2.323
`6.4-7.9
`(54.6)
`(62.0)
`(59.0)
`(9.5-11.8)
`2.825
`3.068
`3.068
`7.7
`(11.5)
`(71.8)
`(77.9)
`(77.9)
`2.725
`2.992
`2.922
`9.30-10.20
`(13.8-15.2)
`(69.2)
`(76.0)
`(74.2)
`2.500
`2.75
`2.75
`12.95
`(19.3)
`(63.5)
`(69.9)
`(69.9)
`3.188
`3.548
`3.476
`9.50-11.00
`(14.1-16.4)
`(81.0)
`(90.1)
`(88.3)
`3.570
`4.090
`3.920
`9.50-13.5
`(14.1-20.1)
`(90.7)
`(103.9)
`(99.6)
`3.440
`3.826
`3.754
`15.10-17.10
`(22.5-25.4)
`(87.4)
`(97.2)
`(95.4)
`3.920
`4.560
`4.276
`11.50-18.00
`(17.1-26.8)
`(99.6)
`(115.8)
`(108.6)
`4.600
`5.012
`5.012
`14.00
`(20.8)
`(116.8)
`(127.3)
`(127.3)
`4.67
`15.50-23.00
`4.300
`4.95
`(23.1-34.2)
`(109.2)
`(125.7)
`(118.6)
`5.950
`6.538
`6.456
`17.00-20.00
`(25.3-29.8)
`(151.1)
`(166.1)
`(164.0)
`5.750
`6.366
`6.094
`23.00-32.00
`(34.2-47.6)
`(146.1)
`(161.7)
`(154.8)
`6.250
`7.025
`6.765
`24.00-33.70
`7-5/8
`(35.7-50.2)
`(158.8)
`(178.4)
`(171.8)
`(193.7)
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`0.440
`(11.2)
`
`0.440
`(11.2)
`
`21.0
`(533.4)
`
`1.125
`(28.6)
`
`1.250
`(31.8)
`
`0.500
`(12.7)
`
`26.0
`(660.4)
`
`1.5
`(38.1)
`
`1.75
`(44.5)
`
`0.630
`(16.0)
`
`28.0
`(711.2)
`
`2.125
`(54.0)
`
`2.5
`(63.5)
`
`1.0
`(25.4)
`
`31
`(787.4)
`
`2.75
`(70.0)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`250°F
`10K PSI
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 6
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Temporary Isolation Tools
` Multi-Stage Operations
`InnovatIon revealed
`InnovatIon revealed
`
`The “Mill E-Z™” Composite Plugs are used for temporary isolation in multi-stage
`vertical or horizontal completion operations. The Mill E-Z™ line includes the Ball Drop,
`Bridge Plug, Flo-Back and Flo-Back with Bio-Ball Plugs. Horizontal applications are
`accomplished with the addition of a Pump Down wiper element. Comprised of proprietary
`composite material and having a low metallic content, the Mill E-Z™ can be quickly and
`easily milled and circulated back to surface.
`
`Ball Drop
`
`Bridge
`
`Flo-Back
`
`Flo-Back
`w/ Bio-Ball
`Mill E-Z™ Ball Drop: After setting, the tool remains open for fluid flow and allows
`wireline services to continue until the ball drop isolation procedure has started. Once
`the surface-dropped ball is pumped down and seated in to the inner funnel top of the
`tool, the operator can pressure up against the plug to achieve isolation.
`Mill E-Z™ Bridge: The Bridge Plug, or “Kill Plug”, has a “top venting” ability, which
`allows for upper and lower equalization during drill out.
`Mill E-Z™ Flo-Back: When the pressure below the plug is greater than the pressure
`above, the one-way check valve will allow the two zones to commingle. The operator can
`independently treat or test each zone and then remove the flo-back plug(s) in one trip
`with conventional milling or drilling tools.
`Mill E-Z™ Flo-Back with Bio-Ball: Also built with a one-way check valve, this plug
`temporarily prevents sand from invading the upper zone and eliminates cross-flow
`problems by utilizing an Aqueous-Soluble Bio-Ball sealer. After the Bio-Ball has dissolved
`by pressure, temperature, or fluid, the check valve will allow the two zones to commingle.
`The operator can then independently treat or test each zone and remove the flo-back
`plug in an under-balanced environment in one trip.
`
`Features
`Features
`
`a Consistent drill times of 30 minutes
`or less
`a Can be set on wireline, coiled
`tubing, or production tubing using
`conventional setting tools
`a Utilizes conventional setting tools
`a Can be milled or drilled with coiled
`tubing or a rig
`a Millable cast iron slips
`a High differential pressure rating
`a “Top Venting” Bridge configuration
`allows for upper & lower equalization
`during drill outs.
`
`a Low temp and high temp materials
`conducive to a wide range of
`environments
`a Positive lock-up feature to ensure
`plugs do not spin while milling
`a Patented precision shearing device
`a Setting is done via a universal setting
`sleeve and adapter.
`a Custom O.D. plugs are available
`upon request
`a Patent #6796376
`
`Pump Down Wipers
`Available for
`Horizontal Applications
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 7
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Ball Drop Plug - Multi-Stage Operations
`
`Ball drop plug
`Ball drop plug
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`i.D.
`inch
`(mm)
`
`Plug sPecs
`bAll
`size
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`OPerAting rAnges
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`7.7
`(11.5)
`9.30-10.20
`(13.8-15.2)
`12.95
`(19.3)
`9.50-11.00
`(14.1-16.4)
`9.50-13.5
`(14.1-20.1)
`15.10-17.10
`(22.5-25.4)
`18.80-20.00
`(28.0-29.8)
`11.50-18.00
`(17.1-26.8)
`14.00
`(20.8)
`15.50-23.00
`(23.1-34.2)
`17.00-20.00
`(25.3-29.8)
`23.00-32.00
`(34.2-47.6)
`24.00-33.70
`(35.7-50.2)
`
`3.068
`(77.9)
`2.922
`(74.2)
`2.75
`(69.9)
`3.476
`(88.3)
`3.920
`(99.6)
`3.754
`(95.4)
`3.640
`(92.5)
`4.276
`(108.6)
`5.012
`(127.3)
`4.67
`(118.6)
`6.456
`(164.0)
`6.094
`(154.8)
`6.765
`(171.8)
`
`3.068
`(77.9)
`2.992
`(76.0)
`2.75
`(69.9)
`3.548
`(90.1)
`4.090
`(103.9)
`3.826
`(97.2)
`3.640
`(92.5)
`4.560
`(115.8)
`5.012
`(127.3)
`4.95
`(125.7)
`6.538
`(166.1)
`6.366
`(161.7)
`7.025
`(178.4)
`
`2.825
`(71.8)
`2.725
`(69.2)
`2.500
`(63.5)
`3.188
`(81.0)
`3.570
`(90.7)
`3.440
`(87.4)
`3.375
`(85.7)
`3.920
`(99.6)
`4.600
`(116.8)
`4.300
`(109.2)
`5.950
`(151.1)
`5.750
`(146.1)
`6.250
`(158.8)
`
`0.750
`(19.1)
`
`17.50
`(444.5)
`
`1.0
`(25.4)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`1.75
`(44.5)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`2.125
`(54.0)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`24.0
`(609.6)
`
`1.360
`(34.5)
`
`1.900
`(48.3)
`
`2.500
`(63.5)
`
`250°F
`10K PSI
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`O.D.
`inch
`(mm)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`7-5/8
`(193.7)
`
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 8
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Bridge Plug - Multi-Stage Operations
`
`BrIdge plug
`BrIdge plug
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`Plug sPecs
`
`OPerAting rAnges
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`2-3/8
`(60.3)
`2-7/8
`(73.0)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`16.380
`(416.1)
`
`17.50
`(444.5)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`23.88
`(606.6)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`23.80
`(604.5)
`
`24.0
`(609.6)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`1.750
`1.995
`1.995
`4.7
`(44.5)
`(7.0)
`(50.7)
`(50.7)
`2.323
`6.4-7.9
`2.150
`2.441
`(9.5-11.8)
`(54.6)
`(62.0)
`(59.0)
`2.825
`3.068
`3.068
`7.7
`(11.5)
`(71.8)
`(77.9)
`(77.9)
`2.725
`3.992
`2.922
`9.30-10.20
`(13.8-15.2)
`(69.2)
`(76.0)
`(74.2)
`2.500
`2.750
`2.750
`12.95
`(19.3)
`(63.5)
`(69.9)
`(69.9)
`3.188
`3.548
`3.476
`9.50-11.00
`(14.1-16.4)
`(81.0)
`(90.1)
`(88.3)
`3.570
`4.090
`3.920
`9.50-13.5
`(14.1-20.1)
`(90.7)
`(103.9)
`(99.6)
`3.440
`3.826
`3.754
`15.10-17.10
`(22.5-25.4)
`(87.4)
`(97.2)
`(95.4)
`3.375
`3.640
`3.640
`18.80-20.00
`(28.0-29.8)
`(85.7)
`(92.5)
`(92.5)
`3.920
`4.560
`4.276
`11.50-18.00
`(17.1-26.8)
`(99.6)
`(115.8)
`(108.6)
`4.600
`5.012
`5.012
`14.00
`(20.8)
`(116.8)
`(127.3)
`(127.3)
`4.67
`15.50-23.00
`4.300
`4.95
`(23.1-34.2)
`(109.2)
`(125.7)
`(118.6)
`5.950
`6.538
`6.456
`17.00-20.00
`(25.3-29.8)
`(151.1)
`(166.1)
`(164.0)
`6.094
`23.00-32.00
`5.750
`6.366
`(34.2-47.6)
`(146.1)
`(161.7)
`(154.8)
`6.250
`7.025
`6.765
`24.00-33.70
`7-5/8
`(35.7-50.2)
`(158.8)
`(178.4)
`(171.8)
`(193.7)
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`Not Yet
`Available
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`250°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 9
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Flo-Back Plug (with Bio-Ball Option)
`Multi-Stage Operations
`
`Flo-BaCk plug
`Flo-BaCk plug
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`Plug sPecs
`
`OPerAting rAnges
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`i.D.
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`2-7/8
`(73.0)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`250°F
`10K PSI
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`23.80
`(604.5)
`
`0.880
`(22.4)
`
`24.0
`(609.6)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`0.500
`(12.7)
`
`18.38
`(466.9)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`23.88
`(606.6)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`0.630
`(16.0)
`
`2.441
`2.323
`6.4-7.9
`2.150
`(9.5-11.8)
`(62.0)
`(59.0)
`(54.6)
`2.825
`3.068
`3.068
`7.7
`(11.5)
`(71.8)
`(77.9)
`(77.9)
`2.725
`2.992
`2.922
`9.30-10.20
`(13.8-15.2)
`(69.2)
`(76.0)
`(74.2)
`2.500
`2.75
`2.75
`12.95
`(19.3)
`(63.5)
`(69.9)
`(69.9)
`3.188
`3.548
`3.476
`9.50-11.00
`(14.1-16.4)
`(81.0)
`(90.1)
`(88.3)
`3.570
`4.090
`3.920
`9.50-13.5
`(14.1-20.1)
`(90.7)
`(103.9)
`(99.6)
`3.440
`3.826
`3.754
`15.10-17.10
`(22.5-25.4)
`(87.4)
`(97.2)
`(95.4)
`3.375
`3.640
`3.640
`18.80-20.00
`(28.0-29.8)
`(85.7)
`(92.5)
`(92.5)
`3.920
`4.560
`4.276
`11.50-18.00
`(17.1-26.8)
`(99.6)
`(115.8)
`(108.6)
`4.600
`5.012
`5.012
`14.00
`(20.8)
`(116.8)
`(127.3)
`(127.3)
`4.670
`15.50-23.00
`4.300
`4.950
`(23.1-34.2)
`(109.2)
`(125.7)
`(118.6)
`5.950
`6.538
`6.456
`17.00-20.00
`(25.3-29.8)
`(151.1)
`(166.1)
`(164.0)
`6.094
`23.00-32.00
`5.750
`6.366
`(34.2-47.6)
`(146.1)
`(161.7)
`(154.8)
`6.250
`7.025
`6.765
`24.00-33.70
`7-5/8
`(35.7-50.2)
`(158.8)
`(178.4)
`(171.8)
`(193.7)
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 10
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Pump-Down Plug - Multi-Stage Operations
`
`InnovatIon revealed
`InnovatIon revealed
`
`The MILL E-Z™ PUMP-DOWN PLUGS are utilized mostly for multi-stage horizontal
`completions. Although all Magnum Composite Plugs can be equipped with Pump Down
`Wipers, the Mill E-Z™ enables the wireline, guns, CCL, plug and other BHA’s to be pumped
`to a desired depth. Once the depth is reached, MILL E-Z™ Pump Down Plugs are then set
`like a conventional bridge plug. Comprised of proprietary composite material and having
`a low metallic content, the Mill E-Z™ Pump Down Plug can be quickly and easily milled
`and circulated back to surface using conventional milling, drilling with a rig and tubing,
`or with coiled tubing.
`
`Ball Drop
`
`Bridge
`
`Flo-Back
`
`Flo-Back
`w/ Bio-Ball
`Mill E-Z™ Ball Drop: After setting, the tool remains open for fluid flow and allows
`wireline services to continue until the ball drop isolation procedure has started. Once
`the surface-dropped ball is pumped down and seated in to the inner funnel top of the
`tool, the operator can pressure up against the plug to achieve isolation.
`Mill E-Z™ Bridge: The Bridge Plug, or “Kill Plug”, has a “top venting” ability, which
`allows for upper and lower equalization during drill out.
`Mill E-Z™ Flo-Back: When the pressure below the plug is greater than the pressure
`above, the one-way check valve will allow the two zones to commingle. The operator can
`independently treat or test each zone and then remove the flo-back plug(s) in one trip
`with conventional milling or drilling tools.
`Mill E-Z™ Flo-Back with Bio-Ball: Also built with a one-way check valve, this plug
`temporarily prevents sand from invading the upper zone and eliminates cross-flow
`problems by utilizing an Aqueous-Soluble Bio-Ball sealer. After the Bio-Ball has dissolved
`by pressure, temperature, or fluid, the check valve will allow the two zones to commingle.
`The operator can then independently treat or test each zone and remove the flo-back
`plug in an under-balanced environment in one trip.
`
`Features
`Features
`
`a Consistent drill times of 30 minutes
`or less
`a Can be pumped to depth at 5 to 8
`barrels/min
`a Designed to be set in horizontal wells
`on wireline
`a Millable cast iron slips
`a Utilizes conventional setting tools
`a Mill or drill multiple plugs in a
`single trip
`a Low temp and high temp materials
`conducive to a wide range of
`environments
`
`a Utilize conventional milling or drilling
`tools for plug removal
`a Positive lock-up feature to ensure
`plugs do not spin while milling
`a Patented precision shearing device
`a High differential pressure rating
`a Custom Plug O.D. available upon
`request
`a Patent #6796376
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 11
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Pump-Down Ball Drop Plug - Multi-Stage Operations
`
`ContInued
`ContInued
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`i.D.
`inch
`(mm)
`
`Plug sPecs
`bAll
`size
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`OPerAting rAnges
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`7.7
`(11.5)
`9.30-10.20
`(13.8-15.2)
`12.95
`(19.3)
`9.50-11.00
`(14.1-16.4)
`9.50-13.5
`(14.1-20.1)
`15.10-17.10
`(22.5-25.4)
`18.80-20.00
`(28.0-29.8)
`11.50-18.00
`(17.1-26.8)
`14.00
`(20.8)
`15.50-23.00
`(23.1-34.2)
`17.00-20.00
`(25.3-29.8)
`23.00-32.00
`(34.2-47.6)
`24.00-33.70
`(35.7-50.2)
`
`3.068
`(77.9)
`2.922
`(74.2)
`2.75
`(69.9)
`3.476
`(88.3)
`3.920
`(99.6)
`3.754
`(95.4)
`3.640
`(92.5)
`4.276
`(108.6)
`5.012
`(127.3)
`4.67
`(118.6)
`6.456
`(164.0)
`6.094
`(154.8)
`6.765
`(171.8)
`
`3.068
`(77.9)
`2.992
`(76.0)
`2.75
`(69.9)
`3.548
`(90.1)
`4.090
`(103.9)
`3.826
`(97.2)
`3.640
`(92.5)
`4.560
`(115.8)
`5.012
`(127.3)
`4.95
`(125.7)
`6.538
`(166.1)
`6.366
`(161.7)
`7.025
`(178.4)
`
`2.825
`(71.8)
`2.725
`(69.2)
`2.500
`(63.5)
`3.188
`(81.0)
`3.570
`(90.7)
`3.440
`(87.4)
`3.375
`(85.7)
`3.920
`(99.6)
`4.600
`(116.8)
`4.300
`(109.2)
`5.950
`(151.1)
`5.750
`(146.1)
`6.250
`(158.8)
`
`0.750
`(19.1)
`
`17.50
`(444.5)
`
`1.0
`(25.4)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`1.75
`(44.5)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`2.125
`(54.0)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`24.0
`(609.6)
`
`1.360
`(34.5)
`
`1.900
`(48.3)
`
`2.500
`(63.5)
`
`250°F
`10K PSI
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`O.D.
`inch
`(mm)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`7-5/8
`(193.7)
`
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 12
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Pump-Down Bridge Plug - Multi-Stage Operations
`
`BrIdge plug
`BrIdge plug
`
`Bridge
`Plug
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`Plug sPecs
`
`OPerAting rAnges
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`2-3/8
`(60.3)
`2-7/8
`(73.0)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`16.380
`(416.1)
`
`17.50
`(444.5)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`23.88
`(606.6)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`23.80
`(604.5)
`
`24.0
`(609.6)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`1.750
`1.995
`1.995
`4.7
`(44.5)
`(7.0)
`(50.7)
`(50.7)
`2.323
`6.4-7.9
`2.150
`2.441
`(9.5-11.8)
`(54.6)
`(62.0)
`(59.0)
`2.825
`3.068
`3.068
`7.7
`(11.5)
`(71.8)
`(77.9)
`(77.9)
`2.725
`3.992
`2.922
`9.30-10.20
`(13.8-15.2)
`(69.2)
`(76.0)
`(74.2)
`2.500
`2.750
`2.750
`12.95
`(19.3)
`(63.5)
`(69.9)
`(69.9)
`3.188
`3.548
`3.476
`9.50-11.00
`(14.1-16.4)
`(81.0)
`(90.1)
`(88.3)
`3.570
`4.090
`3.920
`9.50-13.5
`(14.1-20.1)
`(90.7)
`(103.9)
`(99.6)
`3.440
`3.826
`3.754
`15.10-17.10
`(22.5-25.4)
`(87.4)
`(97.2)
`(95.4)
`3.375
`3.640
`3.640
`18.80-20.00
`(28.0-29.8)
`(85.7)
`(92.5)
`(92.5)
`3.920
`4.560
`4.276
`11.50-18.00
`(17.1-26.8)
`(99.6)
`(115.8)
`(108.6)
`4.600
`5.012
`5.012
`14.00
`(20.8)
`(116.8)
`(127.3)
`(127.3)
`4.67
`15.50-23.00
`4.300
`4.95
`(23.1-34.2)
`(109.2)
`(125.7)
`(118.6)
`5.950
`6.538
`6.456
`17.00-20.00
`(25.3-29.8)
`(151.1)
`(166.1)
`(164.0)
`6.094
`23.00-32.00
`5.750
`6.366
`(34.2-47.6)
`(146.1)
`(161.7)
`(154.8)
`6.250
`7.025
`6.765
`24.00-33.70
`7-5/8
`(35.7-50.2)
`(158.8)
`(178.4)
`(171.8)
`(193.7)
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`Not Yet
`Available
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`250°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 13
`
`MEGCO Ex. 1024
`
`

`
`Mill E-Z™
`
` Pump-Down Flo-Back Plug
`(with Bio-Ball Option) Multi-Stage Operations
`Flo-BaCk plug
`Flo-BaCk plug
`
`cAsing sPecs
`WeigHt
`rAnge
`lb/ft
`(kg/m)
`
`min iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`Plug sPecs
`
`OPerAting rAnges
`
`mAx iD
`inch
`(mm)
`
`O.D.
`inch
`(mm)
`
`i.D.
`inch
`(mm)
`
`lengtH
`inch
`(mm)
`
`setting
`tOOl
`
`lOW
`temP/
`lOW Psi
`
`lOW
`temP
`HigH Psi
`
`miD
`temP
`HigH Psi
`
`HigH
`temP
`HigH Psi
`
`2-7/8
`(73.0)
`
`3-1/2
`(88.9)
`
`4
`(101.6)
`
`4-1/2
`(114.3)
`
`5
`(127.0)
`
`5-1/2
`(139.7)
`
`7
`(177.8)
`
`250°F
`10K PSI
`
`300°F
`10K PSI
`
`400°F
`10K PSI
`
`(121ºC)
`(68.9MPa)
`
`(149ºC)
`(68.9MPa)
`
`(204ºC) /
`(68.9MPa)
`
`Yellow
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`HSN
`Elastomer
`
`Blue
`Composite/
`Viton
`Elastomer
`
`250°F
`8K PSI
`
`(121ºC)
`(55.2MPa)
`
`Green
`Composite/
`HSN
`Elastomer
`
`23.80
`(604.5)
`
`0.880
`(22.4)
`
`24.0
`(609.6)
`
`Magnum
`“A-1”,
`Baker #20
`or Owen
`
`0.500
`(12.7)
`
`18.38
`(466.9)
`
`Magnum
`“A-1”,
`Baker #5
`or Owen
`
`Not Yet
`Available
`
`23.88
`(606.6)
`
`Magnum
`“A-1”,
`Baker #10
`or Owen
`
`0.630
`(16.0)
`
`2.441
`2.323
`6.4-7.9
`2.150
`(9.5-11.8)
`(62.0)
`(59.0)
`(54.6)
`2.825
`3.068
`3.068
`7.7
`(11.5)
`(71.8)
`(77.9)
`(77.9)
`2.725
`2.992
`2.922
`9.30-10.20
`(13.8-15.2)
`(69.2)
`(76.0)
`(74.2)
`2.500
`2.75
`2.75
`12.95
`(19.3)
`(63.5)
`(69.9)
`(69.9)
`3.188
`3.548
`3.476
`9.50-11.00
`(14.1-16.4)
`(81.0)
`(90.1)
`(88.3)
`3.570
`4.090
`3.920
`9.50-13.5
`(14.1-20.1)
`(90.7)
`(103.9)
`(99.6)
`3.440
`3.826
`3.754
`15.10-17.10
`(22.5-25.4)
`(87.4)
`(97.2)
`(95.4)
`3.375
`3.640
`3.640
`18.80-20.00
`(28.0-29.8)
`(85.7)
`(92.5)
`(92.5)
`3.920
`4.560
`4.276
`11.50-18.00
`(17.1-26.8)
`(99.6)
`(115.8)
`(108.6)
`4.600
`5.012
`5.012
`14.00
`(20.8)
`(116.8)
`(127.3)
`(127.3)
`4.670
`15.50-23.00
`4.300
`4.950
`(23.1-34.2)
`(109.2)
`(125.7)
`(118.6)
`5.950
`6.538
`6.456
`17.00-20.00
`(25.3-29.8)
`(151.1)
`(166.1)
`(164.0)
`6.094
`23.00-32.00
`5.750
`6.366
`(34.2-47.6)
`(146.1)
`(161.7)
`(154.8)
`6.250
`7.025
`6.765
`24.00-33.70
`7-5/8
`(35.7-50.2)
`(158.8)
`(178.4)
`(171.8)
`(193.7)
`Casing Specs are according to API Tubing/Casing Dimension Chart information.
`
`MagnumOilTools.com
`@North America: (361) 299.6333 @International: +1 (361) 299.6333 (GMT / -6)
`5655 Bear Lane, Suite 100, Corpus Christi, TX USA 78405
`Page 14
`
`MEGCO Ex. 1024
`
`

`
`“Snub Nose™”
`
` Low Temp/Low Pressure Plug
`
`InnovatIon revealed
`InnovatIon revealed
`
`The “SNUB NOSE”™ composite frac plug is a multi-configuration plug used to temporarily isolate
`multi-stage vertical or horizontal completion operations. The base model of the Snub Nose™ is
`a ball drop configuration. When combined with three additional on-the-fly inserts (Bridge Plug,
`Flo-Back, or Flo-Back with Bio-Ball), this tool provides the service company with optimum on-site
`versatility. Comprised of proprietary composite material and having a low metallic content, the
`Snub Nose™ can be quickly and easily milled and circulated back to surface.
`
`Ball Drop
`
`Bridge
`
`Flo-Back
`
`Flo-Back
`w/Bio-Ball
`Snub Nose™ Ball Drop: After setting, the tool remains open for fluid flow and allows wireline
`services to continue until the ball drop isolation procedure has started. Once the surface-dropped
`ball is pumped down and seated in to the inner funnel top of the tool, the operator can pressure
`up against the plug to achieve isolation.
`Snub Nose™ Bridge: The Bridge Plug, or “Kill Plug”, has a “top venting” ability, which allows for
`upper and lower equalization during drill out.
`Snub Nose™ Flo-Back: When the pressure below the plug is greater than the pressure above,
`the one-way check valve will allow