`
`
`
`MORGAN T. JOHNSON
`6107 SW Fountain Grove Terrace, Beaverton, Oregon 97007 | 503-227-1338 (H) |
`503-358-5658 (Cell) | thorgne@gmail.com
`
`PROFESSIONAL EXPERIENCE
` 2002 – Present
`
`Advanced Inquiry Systems Inc. – Hillsboro, Oregon
`AISI is a venture funded, high tech startup based on my patented technologies covering
`full wafer, single touch down testing of chips. Full wafer contactors called Wafer
`Translators have recently met key milestones and are moving to production with a focus
`on NAND, NOR and DRAM full wafer, single touchdown test. Additionally, technologies
`for contacting flip-chip wafers (CPUs, GPUs and SoCs are examples) are progressing
`and will be shipping by early 2013
`
` 2000 – 2001
`
`
`
`Morgan Johnson Technology – Portland, Oregon
`Informal Partnership with SanDisk, worked with head test engineers and managers,
`developed a full wafer contactor for use in wafer-level-burn-in and test for NAND memory
`wafers. This technology formed the basis for AISI.
`
` 1997 – 1999
`
`
`Prototype Solutions (Phase II) – Beaverton, Oregon
`Developed a technology put forth in a 1994 DARPA proposal. One-hour turn laser
`personalized ceramic substrates were achieved. Laser scribing of isolated wires directly
`in thick-film gold over filled vias on a multilayer co-fired ceramic substrate was developed.
`
` 1994 – 1996
`
`
`Prototype Solutions (Phase I) – Beaverton, Oregon
`Co-founded and served as Chief Technology Officer to develop and bring to market laser
`programmed, removable wiring to market as chip prototyping.
`o Contract with DRC (Design Research Corporation) for a U.S. Navy Project
`requiring:
` Design and build a moderate cost, near IR laser system to customize MCM
`scale and on-chip metal, multi-layer interconnect. The system laser spot
`delivery accuracy of +/- 1/10th micron “on-the-fly” was achieved.
`Innovation: Stacking, pressure connected, ceramic and organic substrates
`- with memory, FPGA and DSP packaged and bare die. This stack was
`topped with a laser programmed wiring plate to interconnect all die with one-
`day turn, no tooling, no soldering and no substrate modification. (All goals
`were met with exception of DSP die which could not be obtained).
`o DARPA Contract:
`Innovation: Laser programmed, removable multi-layer thin-film wiring -
`
`Must connect a minimum of 2,048 pins with random net lists (accomplished).
`
`
`
`MORGAN T. JOHNSON, PAGE 1 OF 4
`
`
`
`
`
`
`
`
`
`
`
`Routing must be 100% with any net list (accomplished). It must take less
`than one hour to route and laser program (final, typical time was 20 min.).
`Innovation:
`tester - Must be
`Inexpensive 100% open and short
`accomplished in one hour. Tester did 100% test & reporting in 2 minutes for
`substrates up to 2,048 pins. Tester cost $3,200.
`Innovation: Laser system for under $100,000 - (actual cost $92,000).
`System routinely programmed copper and gold thin-film metallization on
`break-link wiring plates with organic dielectrics. These 68mm square
`substrates had two or three metal layers with BCB or polyimide dielectrics.
`Innovation: 8 Ceramic plates and a wiring plate pressure connected –
`Stack contained over 80,000 pressures connected lapped gold pads.
`Contract required the stack to be assembled and disassembled 200 times
`without degradation of signals. Proof cycles took one entire day and
`passed.
`Innovation: 3D-i, a patented, solder ball based stacking board-to-board
`connectors - Co-invented, patented and developed with Dave Ekstrom, a
`unique low cost board to board connector that enables board stacking with
`high connection numbers between several boards. Test structure design
`used over 34,000 solder solid core solder balls, which were reflowed in one
`operation. 3D-I patent has issued.
`
`
` 1989 – 1993
`
`
`Morgan Johnson Technology – Portland, Oregon
`o Formalized Partnership: Mentor Graphics – formed with MJTech to develop
`removable laser programmed wiring for use in conjunction with FPGAs to build low
`cost, quick-turn chip emulators.
`o Formalized Partnership: TriQuint Semiconductor – formed with MJTech to
`develop one-day turn custom GaAs ASIC chips. They supplied desk and lab space
`on their site, phone service, clerical service and FAB.
`
`
` 1988 – 1989
`
`
`Morgan Johnson Technology – Palo Alto, California
`o Continued a version of single mask programmed arrays. In one project for Adaptec
`networking chip set development turned a gate array design 8 times in 8 days prior
`to a critical industry conference and show proving how fast development and in-
`system debug could be accomplished.
`Innovation: laser programmed, removable wiring - for quick-turn MCMs and PCBs.
`
` 1983 – 1987
`
`
`
`LaserPath Corporation – Sunnyvale, California
`Founder and Chief Technology Officer. A venture funded high tech startup based on my
`inventions and patents. Investors included Eugene Kliener of Kliener, Perkins, Caulfield,
`Byre, General Electric Venture Capital, Crosspoint Ventures, and James D. Wolfenson.
`Laser Programmed, “Same Day” and five business day delivery of custom chips when
`universal current practice was 12 weeks committed and about 16 to 24 weeks actual.
`
`MORGAN T. JOHNSON, PAGE 2 OF 4
`
`
`
`o
`
`o FORMAL PARTNERSHIP: General Electric Corporation adopted the chip
`process as their corporate standard for internal development of electronics world
`wide and issues a press release to that effect.
`o FORMAL PARTNERSHIP: General Electric Semiconductor contracted as our
`foundry and manufactured our wafers that were the Gate Arrays we laser
`customized.
`Innovation: Laser programmable semicustom gate arrays – done at the wafer
`level, with same functionality as masked programmed chips, same gate and logic
`structure, same I/O cell options, same chip package options. This was the first
`commercial application of laser based random logic creation. Formed Partnership
`with General Electric – GE agreed to act as foundry for LaserPath wafers in return
`for rights to use the technology company-wide for any project needing custom chip.
`Innovation: Single Mask Programming of Custom Chips – Metal 1, Via, Metal 2
`and Pad Mask were replaced in customization with a single “Break-Mask”. Allowed
`an entire wafer to be customized with one mask. Photo masks were being
`delivered in three weeks when the project was undertaken – we were able to
`reduce photo mask delivery to 8 hours without a time premium.
`o Three Patents:
`issued (one Canadian) covering
`laser and single mask
`programmed chips, MCMs and PCBs.
`o LaserPath had twice the design wins in its first year as any previous custom chip
`supplier. 200 custom chip designs were each delivered in 5 business days – only
`one was late (1/2 of one percent) versus typical industry practice of 25 to 30% late.
`Customers included Intel, IBM, Compaq, Hughes, Honeywell, and Rockwell, 11
`groups inside AT&T, Bell Labs, General Electric, Adaptec, Xerox and RCA.
`
`o
`
`
` 1980 – 1982
`
`
`
`
`Hewlett Packard – Corvallis, Oregon
`Joint Project, HP-41C Handhelds. HP’s 41C product line could not be easily used “in-
`the-field” by surveyors, contractors, field researchers and other professionals requiring
`printing and weather protection.
`o
`Innovation: Conversion Kit and Case – Converted separate parts into unified,
`robust portable system with printer and storage for accessories and supplies.
`Shown in HP’s booth at the Consumer Electronics Show in Las Vegas. Officially
`endorsed by HP Corvallis for use with any elements of the 41C product line. Sold
`by HP’s largest distributor, Government Marketing Services from 1980 – 1984.
`Manufactured and assembled by MJDesign.
`
`
` 1980 – 1981
`
`
`
`
`
`Cray Computer – Boulder Colorado
`Funded research to develop Laser Programmed MCMs for Cray II Scientific Super
`Computer System.
`o
`Innovation: Laser programmed PCBs – that could be customized on-site, as
`needed using existing laser trim systems – Cray anticipated 1,400 designs per
`machine on common unprogrammed format.
`
`MORGAN T. JOHNSON, PAGE 3 OF 4
`
`
`
`o
`
`o
`
`Innovation: Laser Programmable MCM structures - 2 mil lines/spaces, plated 2
`mil post vias on Al heat sink carrier, wire bonded bare die ECL, one Gig clock –
`developed jointly with PakTel, San Diego, CA.
`Innovation: Laser Programmed ECL On-Chip Wiring – initial development of laser
`link blowing patterns to program ECL logic, route signals and deliver power and
`ground. First look at on-chip metal link blowing with ESI Model 80 Laser Memory
`Repair System.
`
`
`
`
`
`
`
` 1977 – 1979
`
`
`Morgan Johnson Design – Denver, Colorado
`High Tech Consulting.
`o Designed science education products with focus on energy use issues.
`o
`Innovation: Invented laser programmed interconnect – June, 1978 – applications
`at PCB, hybrid, MCM, single chip package and on-chip metallization levels.
`Innovation: 3D-laser programmable circuit structures – with 2D-laser access.
`Designs had the capability to route signal, ground and voltage creating virtual coax
`wiring.
`
`o
`
`
`
`PATENTS
`
`I have 36 issued patents, about 12 patents pending, about 9 foreign patents pending
`and over 30 patents in draft as of September 2012.
`
`
`
`
`EDUCATION
`B.S. Graphics, University of Oregon, Eugene, OR, 1960-63 & 65.
`Industrial Design, Art Center College of Design, Pasadena, CA, 1964.
`
`
`
`
`MORGAN T. JOHNSON, PAGE 4 OF 4
`
`