throbber
UWS Prompts and Messages
`
`List of Prompts and Messages
`
`CREDIT CARD TYPE NOT FOUND
`
`Error Message
`
`This message displays in response to the following set of
`conditions:
`
`E] The [Credit Card Lookup] key is used.
`E] A credit card number is entered.
`
`E] The beginning digits of the credit card number do not
`correspond to any of those entered in the Tender/Media File.
`
`This message indicates that either the number was entered
`incorrectly, or the system is not programmed to accept that type
`of credit card.
`
`CURRENCY CONVERSION NOT ALLOWED
`WITH THIS TENDER/MEDIA KEY
`
`Error Message
`
`This message displays if a [Tender/media] key that is not
`programmed to accept foreign currency is pressed after a
`[Currency Conversion] key is pressed.
`
`CURRENT SERVING PERIOD HAS EXPIRED
`
`Error Message
`
`This message displays when time has expired for the Serving
`Period currently in use on this UWS. Change to the correct
`Serving Period to ensure that default settings for that Serving
`Period take effect, and Serving Period totals are correctly
`posted.
`
`
`
`DATABASE WILL NOT FIT IN UWS/3 MEMORY
`
`Programming Error
`
`
`
`This message displays if you attempt to use either the [Direct
`Tips] or [Indirect Tips] key to declare tips and are not privileged
`to do so. A privileged employee’s ID must be entered to
`authorize the operation; or, you can press [Clear] to cancel.
`
`DECLARE TIPS FOR OTHER EMPLOYEE
`
`Transaction Privilege Message
`
`This message displays if you attempt to use either the [Direct
`Tips] or [Indirect Tips] key to declare tips for other employees
`and are not privileged to do so. A privileged employee's ID must
`be entered to authorize the operation; or, you can press [Clear]
`to cancel.
`
`A-22
`
`Petitioners‘ Exhibit 1027, Page 331
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`DEFAULT CASH TENDER KEY NOT FOUND
`
`Programming Error
`
`This message displays if you attempt to tender a check to cash
`when the “Default Cash Tender/Media” field in the Revenue
`
`Center Parameter File is set to 0 (Unassigned).
`
`DEFAULT CHARGE TIP NOT FOUND
`
`Programming Error
`
`This message displays if you press a tendering key programmed
`to require a charged tip but the “Charge Tip Service Charge”
`field is set to 0 (Unassigned).
`
`DEFAULT ORDER TYPE IS INACTIVE
`
`Error Message
`
`This message displays if you have set the order type as inactive
`and attempt to perform a transaction.
`
`DEFINITION NOT FOUND FOR (name) or
`DETAIL LIMIT ERROR or
`
`DETAIL SEQUENCE ERROR or
`DETAIL TOO LARGE
`
`Programming Errors
`
`DIRECT VOID
`
`Transaction Privilege Message
`
`This message displays if you attempt to perform a direct void
`and are not privileged to do so. A privileged employee’s ID must
`be entered to authorize the operation; or, you can press [Clear]
`to cancel.
`
`DIRECT VOID NOT ALLOWED
`FOR PAYMENTS ON A CLOSED CHECK
`
`Error Message
`
`This message displays if you attempt to use a direct void (e.g.,
`you press [Void] [Cash]) when adjusting or reopening a closed
`check. Press [Clear] to continue. Payments must be removed
`using line number voids.
`
`DIRECT VOID OF A PREVIOUS PAYMENT ENTRY
`NOT ALLOWED; USE LINE NUMBER VOID
`
`Error Message
`
`This message displays if you attempt to use a direct void (e.g.,
`you press [Void] [Cash]) when removing a payment made earlier
`in this service round (or in a previous service round.) Press
`[Clear] to continue. Payments must be removed using line
`number voids.
`
`8700 User's Manual
`
`A—23
`Petitioners‘ Exhibit 1027, Page 332
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`DISCOUNT AMOUNT ENTRY REQUIRED
`
`Error Message
`
`This message displays if you attempt to post an open amount
`discount without first entering the amount of the discount.
`
`DISCOUNT AMOUNT TOO LARGE
`
`Error Message
`
`This message displays when a discount is entered for an
`amount larger than the total discountable sales. Press [Clear] to
`continue and enter a smaller amount.
`
`DISCOUNT GROUP
`
`Transaction Privilege Message
`
`This message displays if you attempt to use a [Discount] key
`that is included in a privilege group for which your Employee
`Class does not have posting privileges. A privileged employee's
`ID must be entered to authorize the operation; or, you can press
`[Clear] to cancel.
`
`DISCOUNT NOT FOUND
`
`Error Message
`
`This message displays if a number outside the range of discount
`NLU numbers in the Discount File is entered when using a
`Discount NLU key. This message may also display if you press a
`[Discount] key that is not active on the currently assigned menu
`level(s).
`
`EDIT NOT ALLOWED AFTER FOR ENTRY
`
`Error Message
`
`This message displays if you attempt to use the [@/For] key
`twice in editing detail. For example, entering
`[3] [@/For] [5] [@/For] [Edit Seat] will generate this message.
`Press [Clear] to continue.
`
`EDIT PRINTED ITEM
`
`Transaction Privilege Message
`
`This message displays if you attempt to edit a transaction detail
`item (e.g., menu item, discount, service charge, tender, etc.)
`assigned to a seat number that has been split and printed, and
`are not privileged to do so. A privileged employee's ID must be
`entered to authorize the operation; or, you can press [Clear] to
`cancel.
`
`EMPLOYEE CLOCKED IN FOR OVER 24 HOURS
`
`Error Message
`
`This message displays if you attempt to adjust an employee's
`time card (using User Workstation Procedures) and credit the
`employee for a shift of more than 24 hours. Press [Clear] to
`continue.
`
`A-24
`
`Petitioners‘ Exhibit 1027, Page 333
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`EMPLOYEE HAS NO TIMECLOCK ENTRIES
`
`Error Message
`
`This message displays if you reprint a timecard for an employee
`that has no timecard entries.
`
`EMPLOYEE HAS NO VALID JOB CODES
`
`Error Message
`
`This message displays if you are not assigned a valid job code
`and you attempt to clock in.
`
`This message may display if you attempt to use a [Sign in to
`UWS RVC #] keys, and there are no valid job codes in the new
`Revenue Center's Job Code File or in your Employee File.
`
`Press [Clear] to continue. You must see a manager to correct the
`situation.
`
`EMPLOYEE ID CANNOT BE FOUND
`
`Error Message
`
`This message displays if you enter either an Employee Number
`or Employee ID number, and the entry does not occur in the
`Employee File.
`
`EMPLOYEE ID IS ALREADY IN USE
`
`Error Message
`
`This message displays if you attempt to assign an ID to an
`employee (in User Workstation Procedures) and that ID is
`already assigned to another employee. Press [Clear] to continue.
`
`EMPLOYEE INACTIVE
`
`Error Message
`
`This message displays if you enter the Employee Number of an
`employee whose Employee ID is zero.
`
`EMPLOYEE IS NOT PRIVILEGED
`TO RUN THE REQUESTED AUTOSEQUENCE
`
`Error Message
`
`This message displays if you attempt to run an autosequence for
`which you are not privileged. Press [Clear] to continue. An
`authorized employee must sign in to run this autosequence.
`
`8700 User's Manual
`
`A—25
`Petitioners‘ Exhibit 1027, Page 334
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`EMPLOYEE OPEN ON SYSTEM
`
`Error Message
`
`This message displays if you attempt to access a time card
`record (by clocking in or out, by adjusting a time card, or by
`running a labor report) when the time card is already in use for
`one of these actions elsewhere on the System.
`
`The System can be programmed to allow reports to ignore this
`condition. If this prompt appears when you attempt to clock in
`or out, you must wait until the procedure or report is complete.
`
`EMPLOYEE SIGN IN
`
`Transaction Privilege Message
`
`This message displays when an employee who is not privileged
`to sign in attempts to do so. A privileged employee's ID must be
`entered to authorize the operation, or press [Clear] to cancel.
`
`END OF FILE or
`END OF SEQUENCE
`
`Programming Error
`
`ENTER CASHIER NUMBER
`
`Operator Prompt
`
`This prompt displays if you attempt to begin a transaction
`without having first assigned cashier totals. Press [Clear] to
`continue. Use the [Assign Cashier] key to assign cashier totals.
`
`ENTER CHARGE PAYMENT
`
`Operator Prompt
`
`This prompt displays after you have entered a charged tip,
`which must be followed by some form of charge payment. Enter
`a charge payment or void the charged tip.
`
`ENTER CHECK ID
`
`Operator Prompt
`
`This prompt displays if the [Begin Check by ID] key or if the
`Operator is required to enter a Check ID when starting a check.
`Press [Clear] to continue.
`
`ENTER CHECK NUMBER
`
`Operator Prompt
`
`This prompt displays for any of several guest check operations
`that require the guest check number to be entered.
`
`A-26
`
`Petitioners‘ Exhibit 1027, Page 335
`
`

`
`-[
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`ENTER CREDIT CARD INFO
`
`Operator Prompt
`
`This prompt displays when the [Credit Card Lookup] key is
`pressed. Enter the credit card account number. The system will
`use this entry to search the Tender/Media File for a credit card
`preamble that matches the initial character(s) of this entry.
`
`Press [Clear] to cancel the action or enter the credit card
`account number. The mag card reader may also be used to read
`the information from the credit card.
`
`ENTER CURRENCY AMOUNT
`
`Operator Prompt
`
`This prompt may display when you press a [Currency
`Conversion] key. Enter the amount of the base currency which
`you wish to be converted to foreign currency.
`
`ENTER EXPIRATION DATE (MM/YY)
`
`Operator Prompt
`
`This prompt displays when either of the following two keys is
`pressed:
`
`Cl A [Tender/media] key programmed as a credit card key
`
`CI The [Credit Card Lookup] key.
`
`Press [Clear] to cancel the action or enter the expiration date by
`keying a string of three or four digits and pressing [Enter]. For
`example, 999 and 0999 are both interpreted as September,
`1999.
`
`ENTER HELP SCREEN NUMBER
`
`Operator Prompt
`
`This prompt displays if you press a [Help] key that is
`programmed to prompt for a Help Screen number. Enter a Help
`Screen number.
`
`ENTER KEY REQUIRED
`
`Operator Prompt
`
`This prompt appears in any of several operations which are
`required to end with the [Enter] key.
`
`ENTER LINE NUMBER
`
`Operator Prompt
`
`This prompt may display when using an [Edit Seat] key that is
`programmed to prompt for a line number.
`
`8700 User's Manual
`
`A—27
`Petitioners‘ Exhibit 1027, Page 335
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`ENTER NUMBER OF GUESTS
`
`Operator Prompt
`
`This prompt may display when beginning a guest check. This
`prompt cannot be removed with the [Clear] key. Either enter a
`number (0 is allowed), or press [Transaction Cancel].
`
`ENTER PRICE INQUIRY ITEM
`
`Operator Prompt
`
`This prompt displays if you press the [Price Inquiry] key but did
`not enter the item directly after pressing the [Price Inquiry]
`key. Press the [Clear] key to continue.
`
`ENTER REASON CODE
`
`Operator Prompt
`
`This prompt displays if you attempt to void or return an item
`that is not part of the current service round. You must enter a
`valid reason code from the pop—up dialog before continuing.
`
`ENTER TABLE ID
`
`Operator Prompt
`
`This prompt displays if you press either the [Begin Check By
`Table] or the [Pickup Check By Table] key without first entering
`a table number. Enter a table number (an alphanumeric string
`of up to four characters).
`
`ENTER TABLE (number)'S GROUP NUMBER
`
`Error Message
`
`This prompt displays if you pick up a check by table number,
`and there is more than one open check at that table. In this
`case, “number” is the alphanumeric table number that you
`entered.
`
`Take any one of the following steps:
`
`El Press [Clear] to cancel the check pickup.
`
`Cl Enter the correct group number.
`
`Cl Press [Enter] to display the summary of the open check with
`the lowest group number at that table. The prompt will
`change to “PICK UP THIS GUEST CHECK?". Press [Enter]
`again to pick up this check. Press [Clear] to display
`subsequent open checks for this table. Press [Enter] when
`the correct check is displayed.
`
`A-28
`
`Petitioners‘ Exhibit 1027, Page 337
`
`

`
`UWS Prompts and Messages
`List of Prompts and Messages
`
`ENTER (name) AMOUNT
`
`Operator Prompt
`
`This prompt displays when you use an NLU key to access a
`function that requires an amount entry to follow, such as an
`open food item, or an open discount or service charge.
`
`The name used in the prompt is read from the selected record in
`the database file.
`
`Thus, the prompt may read, “ENTER OPEN FOOD AMOUNT”,
`or “ENTER COUPON AMOUNT", etc. Enter the amount
`
`requested for this item.
`
`ENTER (name) EMPLOYEE ID or
`ENTER (name) EMPLOYEE NUMBER
`
`Operator Prompts
`
`One of these prompts displays after any of the following actions:
`
`El You press a [Discount] key that posts to employee meal
`totals.
`
`El You press either the [Direct Tips] or [Indirect Tips] key.
`
`El You pickup a guest check, and your Employee File
`programming requires that you identify yourself.
`
`Revenue Center programming determines which of these two
`prompts displays. The (name) field displays one of the following
`three terms, depending on the action taken:
`
`El MEAL displays when posting an employee meal.
`
`[3 TIP displays for the [Direct Tips] or [Indirect Tips] key.
`
`El CHECK displays when picking up a check.
`
`ENTER (name) INFO
`
`Operator Prompt
`
`This prompt displays when a key is pressed that requires a
`reference entry, such as a menu item, discount, etc. The name
`used depends on the type of entry being made. For example, it
`may read, “TAX EXEMPTION", “CREDIT CARD",
`“DISCOUNT”, etc.
`
`Enter an alphanumeric string of up to 16 characters (or 19
`characters, depending on System programming), or press
`[Clear] to cancel the posting of this item.
`
`ENTER SEAT NUMBER
`
`Operator Prompt
`
`This prompt displays when you attempt to change the current
`active seat. Enter the number of the seat to which you wish to
`change, or press [Clear] to cancel.
`
`8700 User's Manual
`
`A-29
`Petitioners‘ Exhibit 1027, Page 333
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`ENTER (name) PERCENT
`
`Operator Prompt
`
`This prompt displays when you use an NLU key to access a
`function that requires a percentage entry to follow, such as an
`open percentage Discount or an open percentage Service
`Charge. The name used in the prompt is read from the selected
`record in the database file. For example, the prompt may read,
`“ENTER COUPON PERCENTAGE".
`
`Enter the percentage for this item, or press [Clear] to cancel.
`
`ENTRY CONVERSION ERROR
`
`Error Message
`
`This message is used in UWS Procedures. It displays if you
`make an incorrect entry type in a field. For example, this
`message displays if you enter letters in a numeric field.
`
`ENTRY EXCEEDS GUEST COUNT
`
`Error Message
`
`This message displays if, in a guest check transaction, you enter
`a seat number that is greater than the current guest count on
`the check. Press [Clear] to continue. Increase the guest count
`for this check, and begin again.
`
`ENTRY MUST BE ROUND AMOUNT
`
`Error Message
`
`This message appears if you tender a decimal amount (e.g.,
`1.23) and any of several rounding routines are in use (e.g.,
`Round Balance Due, aka Finnish Rounding). Press [Clear] to
`continue.
`
`ENTRY NOT ALLOWED WITH PERCENT DISCOUNT
`
`Operator Prompt
`
`You have attempted to multiply a tender macro that includes a
`percentage discount. You must press [Clear] to continue.
`
`ENTRY NOT ALLOWED WITH PRESET DISCOUNT or
`ENTRY NOT ALLOWED WITH PRESET SERVICE CHARGE
`
`Error Message
`
`This message displays if you enter a number and then press a
`preset [Discount] key (e.g., [2] [Coupon]). Press [Clear] to
`continue.
`
`A-30
`
`Petitioners‘ Exhibit 1027, Page 339
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`ENTRY REQUIRED
`
`Error Message
`
`This message may display under either of the following
`conditions:
`
`[J You press a function key (e.g., [Sign In], [Pickup Check],
`etc.) that should be preceded by letter or number entries and
`was not.
`
`El An NLU screen is displayed and you press [Enter] without
`first typing a number.
`
`ENTRY TOO LARGE or
`ENTRY TOO SMALL
`
`Error Message
`
`These messages indicate that a numeric entry was larger or
`smaller than allowed for that entry. For example, if a table
`number of more than four digits is entered, the message,
`“ENTRY TOO LARGE", displays.
`
`ERROR CHECKING FOR OPEN CHECKS
`
`Error Message
`
`This message displays if the System is programmed to check for
`open checks (for example, before an employee clocks out, or
`before a certain autosequence runs) and is unable to complete
`the search due to System communication problems. Press
`[Clear] to continue.
`
`ERROR CORRECT
`
`Transaction Privilege Message
`
`This message displays if you attempt to void a menu item,
`discount, service charge, or tender posted in the current round,
`and you are not privileged to do so. A privileged employee's ID
`must be entered to authorize the operation; or, you can press
`[Clear] to cancel.
`
`ERROR READING DEFINITION FOR CHAIN-TO TABLE
`
`Programming Error
`
`EXEMPT AUTO GRATUITY
`
`Transaction Privilege Message
`
`This message displays if you try to use the [Exempt Auto
`Service Charge] key and you are not privileged to do so. A
`privileged employee's ID must be entered to authorize the
`operation; or, you can press [Clear] to cancel.
`
`8700 User's Manual
`
`A-31
`Petitioners‘ Exhibit 1027, Page 393
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`EXEMPT TAX
`
`Transaction Privilege Message
`
`This message displays if you are attempting to use one of the
`[Exempt Tax] keys and you are not privileged to exempt taxes.
`A privileged employee's ID must be entered to authorize the
`operation; or, you can press [Clear] to cancel.
`
`FAILURE ALLOCATING MEMORY
`
`Programming Error
`
`FAILURE READING (name)
`
`Programming Error
`
`FAST TRANSACTION CANNOT BE SERVICE TOTALLED
`
`Error Message
`
`This message displays if you attempt to service total a fast
`transaction and your system is not programmed to allow this.
`You must tender and close the guest check on the system before
`beginning another transaction.
`
`FILE ERROR or
`FILE EXISTS
`
`Programming Error
`
`FILTER NOT ALLOWED DURING LINE-BY-LINE PRINTING
`
`Error Message
`
`This message displays if you attempt to use the [Seat Filter] key
`when you are using line—by—line customer receipt printing
`during a fast transaction. Press [Clear] to continue.
`
`FINAL TENDER ENTRY MUST BE VOIDED
`
`Error Message
`
`This message displays if you attempt to modify a re-opened
`check that was closed with a final tender and change was due.
`You cannot modify the check until you void the tender using the
`line item void method.
`
`FOR ENTRY HAS ALREADY BEEN MADE
`
`Error Message
`
`This message displays if you attempt to use the [@/For] key
`twice when the function only allows one entry. Press [Clear] to
`continue.
`
`FOR ENTRY NOT ALLOWED WITH DECIMAL QUANTITY ENTRY
`
`Error Message
`
`This message displays if you attempt to use the [@/For] key with
`a menu item that requires a decimal quantity entry. Press
`[Clear] to continue.
`
`A—32
`
`Petitioners‘ Exhibit 1027, Page 391
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`FOR ENTRY NOT ALLOWED WITH PRESET MENU ITEM
`
`Error Message
`
`This message displays when you attempt to post a split price
`menu item using the [@/For] key with a preset priced menu
`item. Split pricing can be done only with open priced menu
`items.
`
`HELP SCREEN NUMBER (number) NOT FOUND
`
`Error Message
`
`This message displays if you attempt to access a help screen
`that does not exist. Press [Clear] to continue. Try another help
`screen number. or press [Help] and use the [Page Up] or [Page
`Down] key to search the Help Screen File.
`
`HELP WINDOW HAS NO ENTRIES
`
`Error Message
`
`This message displays if you attempt to access an inactive
`[NLU] key, [MajGrp Menu Item] key, or [FamGrp Menu Item]
`key that has no active menu items on the current Menu
`Level(s). Press [Clear] to continue.
`
`HOLD NOT ALLOWED
`
`Error Message
`
`This message displays if Hold & Fire is active and you attempt
`one of these functions: Split Check, Transfer Check, Void Edit,
`or Repeat Round.
`
`HOLD NOT ALLOWED AFTER FOR ENTRY
`
`Error Message
`
`This message displays if you press the [@/For] key, then a [Hold
`Menu Item] key. You cannot use [@/For] with [Hold Menu Item].
`To order multiples of an item placed on hold, you must press the
`item key combination as many times as you wish to order the
`item.
`
`HOLD NOT ALLOWED AFTER AT ENTRY
`
`Error Message
`
`This message displays if you press the [@/For] key, then a [Hold
`Menu Item] key. You cannot use [@/For] with [Hold Menu Item].
`To order multiples of an item placed on hold, you must press the
`item key combination as many times as you wish to order the
`item.
`
`INCORRECT CONDIMENT GROUP
`
`Error Message
`
`This message displays when you attempt to add a condiment to
`a menu item, and that menu item's Menu Item Class is not
`
`programmed to require or allow this particular condiment.
`Press [Clear] to continue.
`
`8700 User's Manual
`
`A—33
`Petitioners‘ Exhibit 1027, Page 392
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`INTERNAL DATABASE ERROR
`
`Programming Error
`
`INVALID CHARGE TIP LINK
`
`Programming Error
`
`This message displays if you press a service charge key that has
`not been deflned as a Charged Tip.
`
`INVALID CHECK ID
`
`Error Message
`
`This message displays if blank spaces were entered instead of
`alphanumeric characters. Press [Clear] and enter the correct ID
`number to continue.
`
`INVALID EMPLOYEE ID
`
`Error Message
`
`This message displays if the System is programmed to require
`the Employee ID when using the [No Sale] key and an employee
`is not privileged to do so. A privileged employee's ID must be
`entered to authorize the operation; or, you can press [Clear] to
`cancel.
`
`INVALID (date/time) ENTRY
`
`Error Message
`
`This message displays if you make an error when entering a
`date or time field. For example, if you enter “13” for the month,
`“32" for the day, or “61” for the minute, this message displays.
`
`INVALID RESPONSE FROM PMS COMPUTER
`
`Error Message
`
`This message displays if the System is unable to interpret a
`message received from a PMS during a charge posting
`operation. Press [Clear] to continue, and post the PMS charge
`again. If the problem persists, this constitutes a Programming
`Error, or a hardware problem.
`
`INVALID SEAT NUMBER
`
`Error Message
`
`This message displays if an invalid seat number is entered with
`the [Seat #] key. Seat numbers must be between 1-63, inclusive.
`Press [Clear] to continue and enter a valid seat number.
`
`INVALID SKU NUMBER
`
`Error Message
`
`This message displays if the System is programmed to perform
`a Check Digit Verification on SKU entries and the number was
`entered incorrect. Press [Clear] to cancel.
`
`A-34
`
`Petitioners‘ Exhibit 1027, Page 393
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`INVALID UPC NUMBER
`
`Error Message
`
`This message displays if the System is programmed to perform
`a Check Digit Verification on UPC entries and the number
`entered or scanned is incorrect. The barcode may be damaged or
`the manually entered number was incorrect. Press [Clear] to
`cancel.
`
`INVALID (other)
`
`Programming Error
`
`ITEM DISCOUNT NOT ALLOWED
`
`Error Message
`
`This message displays if an [Item Discount] key is pressed and
`the last menu item entered does not allow an item discount to
`
`be applied. Item discounts apply only to the last menu item
`entered.
`
`ITEM NOT IN FILE
`
`Error Message
`
`This message displays if the [MI SKU Entry] is used but the
`menu item number is nonexistent in the Menu Item File. Press
`
`[Clear] to continue.
`
`ITEM ORDERED FROM LDS IS NOT AN LDS ITEM
`
`Error Message
`
`This message displays if you attempt to order a menu item
`through the LDS, and that menu item is not a member of a
`Menu Item Class that is programmed as an LDS item.
`
`ITEM WEIGHT KEY NOT ALLOWED AFTER AT
`
`Error Message
`
`This message displays if you press the [@/For] key, then an
`[Item Weight] key. You cannot use [@/For] with [Item Weight].
`To order multiples of an item priced by weight, you must press
`the item key combination as many times as you wish to order
`the item.
`
`ITEMS HAVE BEEN ENTERED THIS ROUND
`
`Error Message
`
`This message displays if you attempt to split or add a guest
`check after entering items in the current round. Service total
`the check, then pick it up and continue.
`
`KEYBOARD IS THE WRONG TYPE FOR THIS WORKSTATION
`
`Error Message
`
`This message displays if you attempt to change to a keyboard
`intended for another type of UWS. For example, if you are using
`a UWS/1 and attempt to change to a keyboard programmed for
`a UWS/2, this message displays. Press [Clear] to continue.
`
`8700 User's Manual
`
`A—35
`Petitioners‘ Exhibit 1027, Page 394
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`KEYBOARD 2 LINK OF SELECTED KEYBOARD NOT FOUND
`
`Error Message
`
`This message displays only for the UWS/1. The message
`displays when changing keyboards, if the UWSI1 is configured
`for two keyboards and the selected keyboard does not have a
`link for the second keyboard.
`
`KEYBOARD 2 NOT ENABLED
`
`Error Message
`
`This message displays only for the UWS/1. The message
`displays if you press a [Keyboard Select] key for the second
`keyboard, and no second keyboard is programmed.
`
`LAST ITEM HOLD NOT ALLOWED
`
`Error Message
`
`This message displays if you press the [Hold Menu Item] key
`and the last detail item was not a menu item. Press [Clear] to
`continue.
`
`LAST ITEM HOLD NOT ALLOWED AFTER PRINTING
`
`Error Message
`
`This message displays if you press the [Hold Menu Item] key
`and the seat check has already been printed during the current
`service round. Press [Clear] to continue.
`
`LAST ITEM VOID NOT ALLOWED
`
`Error Message
`
`This message displays if you partially tender a guest check to a
`Property Management System (for example, through a room
`charge), then attempt to void the action. On completing the
`partial tender, the charge is automatically posted to the PMS
`computer, so a last item void is not allowed. To void an incorrect
`partial tender posted to a PMS, you must void as if it had been
`entered in a previous service round.
`
`LAST ITEM VOID NOT ALLOWED AFTER PRINTING
`
`Error Message
`
`This message displays if you print a memo check and then
`attempt to use last item void to remove a transaction detail item
`(e.g., Menu Item, Discount, Service Charge, or Tender/Media).
`Press [Clear] to continue.
`
`LINE-BY-LINE FAST TRANSACTION CANNOT BE SERVICE TOTALLED
`
`Error Message
`
`This message displays if you are currently in a fast transaction
`that is printing a customer receipt as items are entered and you
`press the [Service Total] key.
`
`A-36
`
`Petitioners‘ Exhibit 1027, Page 395
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`LINE NUMBER VOID NOT ALLOWED
`AFTER DIRECT VOID OF SAME ITEM
`
`Error Message
`
`This message displays if you attempt to use line number void to
`remove an item that has already been removed by direct void.
`Press [Clear] to continue.
`
`LOAN TYPE REQUIRED FOR BANK ENTRY
`
`Error Message
`
`This message displays if you press a [Media Loan] key that is
`programmed incorrectly. Bank must be specified as a Loan type
`in the Tender/Media File.
`
`MACRO DEFINITION NOT FOUND
`
`Error Message
`
`This message displays if you press a [Macro] key and it does not
`exist in the Macro File for this Revenue Center.
`
`MACRO INACIIVE
`
`Programming Error
`
`This message displays if you press a [Macro] key that is
`programmed with key type 0 as its first step.
`
`MAGNETIC CARD IS THE WRONG TYPE
`
`Error Message
`
`This message displays if you swipe a card through the magnetic
`card reader that is of the wrong type. For example, you will
`receive this message if, during a tendering operation, you have
`swiped a magnetic card that is not a credit card.
`
`MAGNETIC CARD REQUIRED FOR EMPLOYEE ID ENTRY
`
`Error Message
`
`This message displays if you attempt to sign in to a UWS using
`the keypad or touchscreen, and the UWS is programmed to
`require the use of magnetic cards for Employee ID entry. Press
`[Clear] to continue, and use a mag card to sign in.
`
`MANUALLY ENTER ITEM WEIGHT
`
`Transaction Privilege Message
`
`This message displays if you attempt to enter a menu item
`weight with the [Item Weight] key and are not privileged to do
`so. A privileged employee's ID must be entered to authorize the
`operation; or, you can press [Clear] to cancel.
`
`8700 User's Manual
`
`A—37
`Petitioners‘ Exhibit 1027, Page 395
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`MEMORY CANNOT BE ALLOCATED FOR HELP SCREEN
`
`Programming Error
`
`MENU ITEM ENTRY NOT ALLOWED WITHOUT GUEST CHECK
`
`Error Message
`
`This message displays if the current Revenue Center is
`programmed to prevent fast transactions. Press [Clear] to
`continue and begin a check using one of the [Begin Check] keys.
`
`MENU ITEM GROUP
`
`Transaction Privilege Message
`
`This message displays if you attempt to post a menu item that
`is assigned to a privilege group for which your Employee Class
`does not have posting privileges. A privileged employee's ID
`must be entered to authorize the operation; or, you can press
`[Clear] to cancel.
`
`MENU ITEM NOT FOUND or
`MENU ITEM MASTER NOT FOUND or
`MENU ITEM PRICE NOT FOUND
`
`Error Messages
`
`These messages may display in response to either of two
`situations:
`
`CI A menu item is selected using a [Menu Item NLU] key, and
`the lookup number entered is not found in the appropriate
`menu item file.
`
`CI A menu item is selected that is not active on the current
`
`Menu Level(s).
`
`MENU ITEMS ON CLOSED CHECKS CANNOT BE CHANGED
`
`Error Message
`
`This message displays if the current Revenue Center is
`programmed to prevent menu items from being altered on
`reopened checks. Press [Clear] to continue.
`
`MENU ITEMS ON HOLD
`
`Error Message
`
`This message displays if you are using the hold and fire
`function, and you attempt to split, memo tender, or transfer this
`check before firing. Press [Clear] to continue. Fire the order and
`begin again.
`
`A-38
`
`Petitioners‘ Exhibit 1027, Page 397
`
`

`
`-I
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`MORE THAN 9 GUESTS?
`
`Operator Prompt
`
`This prompt displays in response to either of two situations:
`
`III A number greater than 9 is entered in response to the
`prompt, “ENTER NUMBER OF GUESTS".
`
`III A number greater than 9 is entered using the [Guests] key.
`
`Press [Enter] to confirm the number, or [Clear] to cancel it.
`
`MULTIPLE DECIMAL POINTS IN ENTRY STRING
`
`Error Message
`
`This message displays if you enter a number with more than
`one decimal point. For example, entering the number 1.0.1 will
`generate this message. Press [Clear] and re—enter the number.
`
`MUST CLOCK IN TO (name)
`
`Error Message
`
`This message displays if you attempt to clock in to a Revenue
`Center for which your record in the Employee File has not been
`programmed. The name of the Revenue Center to which you are
`assigned displays in the prompt.
`
`MUST SELECT PARENT ITEM
`
`Error Message
`
`This message displays when you attempt to use line item void to
`remove a condiment. Press [Clear] to continue, and void the
`entree (or “parent item”). The condiment will be removed as
`well.
`
`NEGATIVE TRANSACTION BALANCE
`
`Transaction Privilege Message
`
`This message displays if you attempt to drive the balance of the
`current transaction to a negative value and are not privileged to
`do so. (Depending on privileges, this may be done using
`discounts, voids, or negative priced menu items.) A privileged
`employee's ID must be entered to authorize the operation; or,
`you can press [Clear] to cancel.
`
`NEW CHECK
`
`Programming Error
`
`NO CASH DRAWER ASSIGNED
`
`Error Message
`
`This message displays if you use the [No Sale] key to open a
`cash drawer and there is no cash drawer assigned to you.
`
`8700 User's Manual
`
`A—39
`Petitioners‘ Exhibit 1027, Page 393
`
`

`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`NO CHECK FILE PC DEFINED FOR THIS RVC or
`NO COMMS BUFFER or
`NO DETAIL FOR SLU
`
`Programming Errors
`
`NO EMPLOYEE ASSIGNED TO CASH DRAWER AT THIS WORKSTATION Error Message
`
`This message displays if there is an attempt to use the [Unasgn
`Csh Drawr] key when there are no employees currently
`assigned to any cash drawer. Press [Clear] to continue.
`
`N0 ENTRIES THIS ROUND
`
`Error Message
`
`This message displays if, in a guest check transaction, you press
`[Void] twice without previously posting any voidable detail in
`the same service round.
`
`NO ENTRIES TO SPLIT
`
`Error Message
`
`This message displays if you attempt to use the [Split Check]
`key to split a check before any entries have been posted to the
`check.
`
`N0 HELP AVAILABLE
`
`Error Message
`
`This message displays if you press the [Field Help] key (in User
`Workstation Procedures or User Workstation Reports) and no
`help windows are available for the field you have selected.
`
`No ITEMS TO REPEAT
`
`Error Message
`
`This message displays if you press the [Repeat Round] key and
`no items from the previous service rounds are programmed to
`repeat. Menu items must be programmed to allow their use
`with the [Repeat Round] key.
`
`A-40
`
`Petitioners‘ Exhibit 1027, Page 399
`
`

`
`-I
`
`NO KEYS IN TEMPORARY TOUCHSCREEN or
`NO KEYS IN TOUCHSCREEN or
`NO MENU ITEMS FOR CONDIMENT GROUP or
`NO MENU ITEMS FOR SLU
`
`UWS Prompts and Messages
`
`List of Prompts and Messages
`
`Programming E

This document is available on Docket Alarm but you must sign up to view it.


Or .

Accessing this document will incur an additional charge of $.

After purchase, you can access this document again without charge.

Accept $ Charge
throbber

Still Working On It

This document is taking longer than usual to download. This can happen if we need to contact the court directly to obtain the document and their servers are running slowly.

Give it another minute or two to complete, and then try the refresh button.

throbber

A few More Minutes ... Still Working

It can take up to 5 minutes for us to download a document if the court servers are running slowly.

Thank you for your continued patience.

This document could not be displayed.

We could not find this document within its docket. Please go back to the docket page and check the link. If that does not work, go back to the docket and refresh it to pull the newest information.

Your account does not support viewing this document.

You need a Paid Account to view this document. Click here to change your account type.

Your account does not support viewing this document.

Set your membership status to view this document.

With a Docket Alarm membership, you'll get a whole lot more, including:

  • Up-to-date information for this case.
  • Email alerts whenever there is an update.
  • Full text search for other cases.
  • Get email alerts whenever a new case matches your search.

Become a Member

One Moment Please

The filing “” is large (MB) and is being downloaded.

Please refresh this page in a few minutes to see if the filing has been downloaded. The filing will also be emailed to you when the download completes.

Your document is on its way!

If you do not receive the document in five minutes, contact support at support@docketalarm.com.

Sealed Document

We are unable to display this document, it may be under a court ordered seal.

If you have proper credentials to access the file, you may proceed directly to the court's system using your government issued username and password.


Access Government Site

We are redirecting you
to a mobile optimized page.





Document Unreadable or Corrupt

Refresh this Document
Go to the Docket

We are unable to display this document.

Refresh this Document
Go to the Docket