Docket No. SUN.LGI.420
`
`Docket No. P2012-20451U$8
`
`ante / 10/29 do]
`LGUE's:AX X27 OSS
`
`SUPPLEMENTAL SHEET FOR
`DECLARATION AND ASSIGNMENT
`
`ADDITIONAL INVENTOR(S)
`Supplemental Sheet Page _|_ of_I_
`
`LEGAL NAMEOF JOINT INVENTOR, IF ANY:
`
`LegalName BR, Jung Oh
`of inventor
`
`
`Date:
`
`XJ
`
`oct,
`
`»v/>
`
`Ss
`
`Invenir’s
`ipnalur
`
`e
`
`(
`Jf, €
`fy f
`/ yl 4
`
`Zé
`
`LEGAL NAME OF JOINT INVENTOR, IF ANY:
`
`LegalName REM, Sung Hyun
`ofinventor
`F608,pep
`Inventor’s
`
`Date;
`
`Signature
`
`
`
`
`fif HL, AL-
`
`LEGAL NAME OF JOINT INVENTOR,IF ANY:
`
`Legal Name
`of inventor
`
`IM, Yang Hyun
`
`Date:
`
`Inventor's
`Signature
`
`LEGAL NAME OF JOINT INVENTOR,IF ANY:
`
`
`
`Legal Name
`of Inventor
`
`Inventor’s
`Signature
`
`Date:
`
`
`
`LEGAL NAME OF JOINT INVENTOR, IF ANY:
`
`Legal Name
`ofinventor
`
`Inventor’s
`Signature
`
`Date:
`
`
`
`Page 3 of 4
`
`Page 914 of 981
`
`GOOGLE EXHIBIT 1011 (part 3 of 3)
`
`Page 914 of 981
`
`GOOGLE EXHIBIT 1011 (part 3 of 3)
`
`

`

`Docket No. SUN.LGI.420
`
`Docket No. P2012-20451US
`
`aniefio/es Agel
`LOOT L.Ed /x ax. 197 PBS
`
`SUPPLEMENTAL SHEET FOR
`DECLARATION AND ASSIGNMENT
`
`ADDITIONAL INVENTOR(S)
`Supplemental Shect Page | of1
`
`LEGAL NAMEOFJOINT INVENTOR, IF ANY:
`
`Legal Name LEE, Jung Oh
`of inventor
`
`
`Date:
`
`Inventor’s
`Signature
`
`LEGAL NAME GF JOINT INVENTOR, IF ANY:
`
`Legal Name
`of inventor
`
`LEEM,Sung Hyun
`
`Inventor’s
`Signature
`
`LEGAL NAME OF JOINT INVENTOR, IF ANY:
`
`Legal Name KIM, Yang Hyun
`of inventor
`
`
`Date:
`
`Date:
`
`pup.
`
`. fo 49
`
`Tnventar’s
`Signature
`
`
`
`LEGAL NAME OF JOINT INVENTOR, IF ANY:
`
`Legal Name
`of inventor
`
`Taventor’s
`Signature
`
`LEGAL NAME OF JOINT INVENTOR,IF ANY:
`
`Legal Name
`of inventor
`
`Inventor’s
`Signature
`
`Date:
`
`Date:
`
`Page 915 of 981
`
`Page 4 of 4
`
`Page 915 of 981
`
`

`

`POWER OF ATTORNEYBY APPLICANT
`
`
`| hereby revoke all previous powers of attorney givenin the application identified in the attached transmittalletter.
`| hereby appcint Practitioner(s) associated with the following Customer Number as my/our attorney(s) or agent(s), and to
`
`transact all business in the United States Patent and Trademark Office connected therewith for the application referenced
`
`in the atlached transmittal letter (form PTO/AIA/82A or equivalent):
`
`
`23557
`on
`CJ | hereby appoint Practitioner(s) named below as my/our attorney(s) or agent(s), and to transact all business in the
`United States Patent and Trademark Office connected therewith for the application referenced in the allached
`
`transmittal letter (form PTOUAIAIB2A¢orr equivalent):
`
`
`Registration
`Number
`. — Name _
`
`
`
`N
`
`| Registration
`Number
`
`
`
`
`
`
`
`
`
`PTOVAIA/S2B(07-12)
`Approved for use through 11/30/2074. OMB 0851-9035
`U.S. Patent and Trademark Office; U.S. DEPARTMENT OF COMMERCE
`Underthee Paperwork Reduction Act of 1996, no persons are required to respondto a collection of information unless Itdispiays ¢a valid OMB contro! number.
`
`Please recognize or change the correspondence address for the applicationidentified in the attached
`transmittal letter to:
`(mi) The address associated with the above-mentioned Customer Number.
`OR
`
`[ The address assaciated with Customer Number:
`OR
`Firra or
`
`Individual Narne
`Address
`
`
`
`
`
`City
`State
`Zip
`
`
`
`Gountry
`Telephone
`Tam the Applicant:
`[_|Inventoror Joint Inventor
`[" ]Legal Representative of a Deceased or Legally Incapacitated Inventor
`[x]Assignee or Person to Whorn the Inventor is Under an Obligation to Assign
`
`
`[ ]Person Who Otherwise Shows Sufficient Proprietary Interest (e.¢., a petition under 37 CFR 1.46(b)(2) was
`
`granted in the application or is concurrently being filed with this document)
`
`SIGNATURE of Afpcan{forPatent
`
`
`
`ee[Neos \ O07£ Ct
`eitbey 5) For.
`Mere|and Company_|VicePeagstene) LG InnotekCo., Ltd.
`
`gabongkim“7| Telephone|+82-31-436-7800
`
`
`
`NOTE: Signature - This form must be signed by the applicant in accordance with
`CFR1.33. See 37 CFR 14 for signature requirements and
`certifications. Submit multiple forms for more than one signature, see below *.
`
`
`[J *Total of
`forms are submitted,
`This collection of information Is required by 37 CFR 1.31, 1.32 and 1.33. The information fs required to obtain or retain a benefit by the public which is to file (and by the
`USPTO to process) an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14 and 1.44, This ccllection Is estimated to take 3 minutes to cornpiete,
`including gathering, preparing, and submitling the completed application form to the USPTO. Time will vary depending upon the Individual case. Any comments on
`the amountof time you require to complete this form and/or suggestions for reducing this burden, should be sentto the Chief Information Officer, U.S. Patent and
`Tiademark Office, U.S. Desarment of Commerce, P.O. Box 1450, Alexandria, VA 22313-1450. DO NOT SEND FEES OR COMPLETED FORMS TO THIS
`ADDRESS. SEND TO: Commissionerfor Patents, P,O, Box 1450, Alexandria, VA 22313-1460.
`
`{
`
`
`
`
`
`
`
`if you need assistance in completing the form, call 1-800-PTO-9199 and select option 2.
`
`Page 916 of 981
`
`Page 916 of 981
`
`

`

`I hereby certify that this correspondenceis being
`electronically filed in the United States Patent
`and Trademark Office on November 23, 2016.
`
`
`Jeff Lloy
`, ney, Reg. No. 35,589
`
`
`
`
`INFORMATION DISCLOSURE
`STATEMENT
`UNDER37 C.F.R §§ 1.97 AND 1.98
`Patent Application
`Docket No. SUN.LGL420D1
`
`THE UNITED STATES PATENT AND TRADEMARK OFFICE
`
`Applicants
`Filed
`
`For
`
`—:
`:
`
`:
`
`Jeong Wook An, Jung Oh Lee, Sung Hyun Leem, Yang Hyun Kim
`November 23, 2016
`
`Wireless Power Receiver And Method Of Manufacturing The Same
`
`Commissionerfor Patents
`P.O. Box 1450
`Alexandria, VA 22313-1450
`
`
`INFORMATION DISCLOSURESTATEMENT
`UNDER37 C.F.R. §§ 1.97 AND 1.98
`
`Sir:
`
`In accordance with 37 CFR §§1.97 and 1.98, Applicants would like to bring to the
`
`attention of the Examinerthe referencescited in the following pending patent application:
`
`U.S. Serial No. 13/663,012, filed October 29, 2012.
`The subject application claims the benefit under 35 USC §120 of the filing date of patent
`application Serial No. 13/663,012. Applicants respectfully request that the copies of references
`supplied in the Information Disclosure Statement of the 13/663,012 application, as well as any
`references cited during the prosecution thereof, be made ofrecord in the subject application. As
`copies of the references made ofrecord in the 13/663,012 application and cited on the attached
`form PTO/SB/08 can be found in the 13/663,012 casefile, copies of those references are not
`
`provided herewith.
`It is respectfully requested that the references cited on the attached form PTO/SB/08 be
`considered in the examination of the subject application and that their consideration be made of
`
`record,
`
`JASUN\LGI\420D1\IDS-refs\IDS.doc/mep
`
`Page 917 of 981
`
`Page 917 of 981
`
`

`

`2
`
`Docket No. SUN.LGI.420D1
`
`Applicants respectfully assert that the substantive provisions of 37 CFR 81.97 and 1.98
`are met by the foregoing statements.
`The Commissioner is hereby authorized to charge any fees under 37 C.F.R. §§ 1.16 or
`
`1.17 as required bythis paper to Deposit Account 19-0065.
`
` Respectfully Zt
`
`
`
`Registration No. 35,589
`Phone No.:
`352-375-8100
`Fax No.:
`352-372-5800
`Address:
`Saliwanchik, Lloyd & Eisenschenk
`A Professional Association
`P.O. Box 142950
`Gainesville, FL 32614-2950
`
`JL/mep
`
`Attachments: Form PTO/SB/08.
`
`J:AASUN\LGIM420D IMIDS-refs\IDS.doc/mep
`
`Page 918 of 981
`
`Page 918 of 981
`
`

`

`PTO/SB/08A (08-03)
`Approved for use through 07/31/2006. OMB 0651-0031
`U.S. Patent and Trademark Office: U.S. DEPARTMENT OF COMMERCE
`Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB
`control number.
`Substitute for form 14494/PTO
`INFORMATION DISCLOSURE
`STATEMENT BY APPLICANT
`
`Complete if Know
`———
`Application Number
`
`
`November 23, 2016
`Filing Date
`
`First Named Inventor
`Jeong Wook An
`
`(use as many sheets as necessary)
`
`
`Examiner Name
`
`
`
`Attorney Docket Number|SUN.LGI.420D1
`
`
`
` U.S. PATENT DOCUMENTS
`Examiner
`Cite
`Publication Date
`Nameof Patentee or Applicant
`Pages, Columns,Lines, Where
`Number- Kind Cade’
`(if
`Initials”
`No.’
`MM-DD-YYYY
`of Cited Document
`Relevant Passagesor Relevant
`:
`Figures Appear
`known
`
`Lut|2008/0164840-A1 07-10-2008 Hiroshi Kato etal
`
`U1
`~
`
`|u2_| 2012/0044114-A1 02-23-2012 Sang-Jin Eom et al
`
`
`U2
`=
`
`|us| 2010/0277004-A1 41-04-2010 Suzuki et al
`
`
`:
`U3
`|
`.
`
`|ua|2005/0046573-A1 03-03-2005 Velasco ef al
`
`U4
`
`|||
`
`|||
`
`||
`
`Art Unit
`
`
`
`
`
`:
`|us|2009/0058358-a1|_03-05-2009
`U6
`-
`
`|ur|2012/0057322-A1 03-08-2012|Eberhard Waffenschmidt
`U7
`=
`-26-
`
`us|2008/0154178-A1 06-26-2008 Carteretal.
`
`U8
`P|uo[|2008122870-a1|05-29-2008|_KonomuTakaishh|ALL
`U9
`FP[uio|e.008,622-a|12-28-1909|NorioNakawatase|ALLS
`PutTaorsozesacaar|11-24-2011[|seongeta,=|
`P|ua|2o0eireesoa-a1|07-27-2006|Okawaetah|ALLS
`2008/0129439-A1
`06-05-2008
`Nishikawa et al.
`futa|2orsorz7070.a1|06-02-2011|nner=|
`| 2014/0091640-A1
`04-03-2014
`Scholz etal.
`
`
`
`04-07-2005
`Se-hoon Cho
`
`2005/0072595-A1
`
`pa
`
`
`Maruyama et al.
`01-25-2007
`2007/0020932-A1
`
`
`2010/0289341-A1
`2005/0116874-A1
`
`El-Mahdawy etal.
`
`Yamazaki et al
`
`.
`
`
`
`iAfshin Partovi
`
`
`
`
`
`U16
`
`U18
`
`|P
`
`|—
`
`U20
`
`2007/0254432-A1
`
`11-01-2007
`
`
`U21
`2007/0279002-A1
`12-06-2007
`
`UY22
`2010/0308187-A1
`
`12-09-2010
`
`14-18-2010
`
`06-02-2005
`
`Signature
`
`Considered
`
`Initial if reference considered, whetherornotcitation is in conformance with MPEP 609. Drawline through citation if not in conformance and not
`“EXAMINER:
`considered. Include copy of this form with next communication to applicant.
`’ Applicant's unique citation designation number (optional).
`* See Kind Codes of
`USPTO Patent Documents at wyw.uspto.gov or MPEP901.04.
`° Enter Office that issued the document, by the two-letter code (WIPO Standard T.3).
`For
`Japanese patent documents, the indication of the year of the reign of the Emperor must precede the serial numberof the patent document.
`> Kind of document by
`the appropriate symbols as indicated on the document under WIPO Standard ST. 16 if possible.
`8 Applicant is to place a check mark here if English language
`Translation is attached.
`This collection of information is required by 37 CFR 1.97 and 1.98. The information is required to obtain or retain a benefit by the public whichisto file (and by the
`USPTO to process) an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14. This collection is estimated to take 2 hours to complete,
`including gathering, preparing, and submitting the completed application form to the USPTO. Timewill vary depending upon the individual case. Any comments
`on the amount of time you require to complete this form and/or suggestions for reducing this burden, should be sent to the Chief information Officer, U.S. Patent
`and Trademark Office, P.O. Box 1450, Alexandria, VA 22313-1450. DO NOT SEND FEES OR COMPLETED FORMS TO THIS ADDRESS.
`SEND TO:
`Commissioner for Patents, P.O. Box 1450, Alexandria, VA 22313-1450.
`if you need assistance in completing the form, call 1-800-PTO-97199 (1-800-786-9199) and select option 2.
`
`JASUN\LGIM420D1\MIDS-refs\PTO-SB-08 doc/mep
`
`Page 919 of 981
`
`Page 919 of 981
`
`

`

`PTO/SB/OBA (08-03)
`Approved for use through 07/31/2006. OMB 0651-0031
`U.S. Patent and Trademark Office: U.S. DEPARTMENT OF COMMERCE
`Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB
`control number.
`Substitute for form 14494/PTO
`
`INFORMATION DISCLOSURE
`STATEMENT BY APPLICANT
`
`(use as many sheets as necessary)
`
`
`Complete if Known
`
`Application Number
`
`Filing Date
`November 23, 2016
`
`First Named Inventor
`Jeong Wook An
`
`Art Unit
`Examiner Name
`
`Attorney Docket Number|SUN.LGI.420D1
`
`
`
` U.S. PATENT DOCUMENTS
`Examiner
`Document Number
`Publication Date
`Nameof Patentee or Applicant
`Pages, Columns, Lines, Where
`Cite.
`initiais*
`MM-DD-YYYY
`of Cited Document
`FeaeaOo
`No
`:
`11-03-2011
`23
`
`
`
`
`
`
`
`
`pT
`
`
`
`24
`
`25
`
`26
`
`27
`
`28
`
`29
`
`30
`
`31
`
`.
`
`08-21-2008
`
`01-26-2012
`
`03-01-2012
`
`10-30-2008
`
`01-29-2009
`
`05-02-2013
`
`07-31-2003
`
`U U U U U U U U U
`
`2016/0118711-A1__|
`
`04-28-2016
`
`2013/0106198-A1
`
`05-02-2013
`
`Yoon-Sang Kuk e¢ al
`
`08-08-2013
`
`07-10-2008
`
`08-21-2007
`
`08-07-1990
`
`10-04-2012
`
`05-07-2009
`
`02-03-2015
`10-17-2013
`
`08-14-2014
`
`:
`
`Larry Schoiz
`
`Yoshikazu Maruyama
`et al.
`Joshua G. Nickel ef al.
`
`Keisuke Sato
`
`Considered
`
`8,947 ,189-B2
`2013/0271328-A1
`
`2014/0226293-A1
`
`32
`
`33
`
`34
`
`35
`
`36
`
`37
`
`38
`
`39
`
`40
`
`44
`
`42
`
`43
`
`U U U U U U U U U U U U
`
`
`
`Examiner
`Signature
`
`Initial if reference considered, whether or not citation is in conformance with MPEP 609. Drawline through citation if not in conformance and not
`*EXAMINER:
`considered. Include copy of this form with next communication to applicant. ‘ Applicant's unique citation designation number(optional). ? See Kind Codes of
`USPTO Patent Documents at www.uspto.gov or MPEP901.04.
`* Enter Office that issued the document, by the two-letter code (WIPO Standard T.3).
`* For
`Japanese patent documents,the indication of the yearof the reign of the Emperor must precede the serial number of the patent document
`© Kind of document by
`the appropriate symbols as indicated on the document under WIPO Standard ST. 16 if possible.
`® Applicant is to place a check mark here if English language
`Translation is attached.
`This collection of information is required by 37 CFR 1.97 and 1.98. The information is required to obtain orretain a benefit by the public whichis tofile (and by the
`USPTO to process) an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14. This collection is estimated to take 2 hours to complete,
`including gathering, preparing, and submitting the completed application form to the USPTO. Time will vary depending upon the individual case. Any comments
`on the amountof time you require to complete this form and/or suggestions for reducing this burden, should be sent to the Chief information Officer, U.S. Patent
`and Trademark Office, PO, Box 1450, Alexandria, VA 22313-1450. DO NOT SEND FEES OR COMPLETED FORMS TO THIS ADDRESS.
`SEND TO:
`Commissionerfor Patents, P.O. Box 1450, Alexandria, VA 22313-1450.
`{ff you need assistance in completing the form, call 1-800-PTQ-9199 (1-800-786-9199) and select option 2.
`
`JASUN\LGIM20D 1\IDS-refs\PTO-SB-08.doc/mep
`
`Page 920 of 981
`
`Page 920 of 981
`
`

`

`PTO/SB/O8A (08-03)
`Approvedfor use through 07/31/2006. OMB 0651-0031
`U.S. Patent and Trademark Office: U.S. DEPARTMENT OF COMMERCE
`Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB
`control number
`
`Substitute for form 14494/PTO
`
`
`Complete if Known
`
`Application Number
`Filing Date
`INFORMATION DISCLOSURE
`November23, 2016
`
`STATEMENT BY APPLICANT
`First Named Inventor
`Jeong Wook An
`Art Unit
`Examiner Name
`
`(use as many sheets as necessary)
`
`Attorney Docket Number|SUN.LGI.420D1
`
`Pages, Cokimns, Lines,
`Foreign Patent Document
`t
`eBoy A name ochnates or
`Cite
`Examiner
`Where Relevant Passages
`sa
`.
`—
`Ppiicant
`of
`Uiled
`Documen
`No '
`Initials*
`or Relevant Figures Appear
`8
`4
`48
`
`
`Country Code ~ Number©- Kind Code” (if known tT
`
`
`ie JP-2002-299138-A 10-11-2002|Kawasaki SieelComp.] aur|_|
`Sony Ericsson. Mobile
`F2
`JP-2008-172872-A
`07-24-2008
`Comm. JP
`ALL
`
`||gg|JP-2008-205215-A 09-04-2008|SeikoEpsonCop.|__au.——s|_|
`Yonezawa Densen
`KK
`
`F4
`
`JP-2008-210861-A
`
`09-11-2008
`
`F5
`
`JP-2008-27015-A
`
`02-07-2008
`
`
`
` FOREIGN PATENT DOCUMENTS
`
`
`
`
`
`
`
`
`
`Samsung Elec. Co.
`FQ
`KR-10-2012-0016778-A
`02-27-2012
`Ltd.
`
`|ao|JP-2006-042519-A 02-09-2006 Seiko Epson Corp.
`
`
`|gat|JP-2012-010533-A 01-12-2012|Murata MFG Co., Ltd.
`
`|aa|JP-H08-79976-A 03-22-1996 TDK Corp.
`
`HITACHI FERRITE
`y
`;
`,
`|
`F13 |
`JPH-04-51115-
`04-30-1992 |
`LTD.
`03-17-1995
`ae JPH-07-74038-
`TDK CORP
`A
`a
`OMRON
`CORPORATION
`Samsung Electro
`Mechanics KK.
`02-22-2012
`F16
`CN-102360718-A
`TDK Corp.
`06-07-2006
`ae CN-1784510-A
`
`||gag|CN-101256876-A 09-03-2008 TDK Corp.
`
`Examiner
`Date
`Signature
`Considered
`
`
`Initial if reference considered, whetheror not citation is in conformance with MPEP 609. Draw line through citation if not in conformance and not
`*EXAMINER:
`considered. Include copy of this form with next communication to applicant.
`' Applicant's unique citation designation number (optional). ? See Kind Codes of
`USPTO Patent Documents at www.uspto.gov or MPEP901.04.
`* Enter Office that issued the document, by the two-letter code (WIPO Standard 1.3).
`* For
`Japanese patent documents, the indication of the yearof the reign of the Emperor must precede the serial numberof the patent document.
`° Kind of document by
`the appropriate symbols as indicated on the document under WIPO Standard ST. 16 if possible.
`° Applicant is to place a check mark here if English language
`Translation is attached.
`This collection of information is required by 37 CFR 1.97 and 1.98. The information is required to obtain or retain a benefit by the public whichis to file (and by the
`USPTO to process) an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14. This collection is estimated to take 2 hours to complete,
`including gathering, preparing, and submitting the completed application form to the USPTO. Time will vary depending uponthe individual case. Any comments
`on the amountof time you require to complete this form and/or suggestions for reducing this burden, should be sent to the Chief information Officer, U.S. Patent
`and Trademark Office, P.O. Box 1450, Alexandria, VA 22313-1450. DO NOT SEND FEES OR COMPLETED FORMS TO THIS ADDRESS.
`SEND TO:
`Commissionerfor Patents, P.O. Box 1450, Alexandria, VA 22313-1450.
`if you need assistance in completing the form, cali 1-800-PTO-9199 (1-800-786-9199) and select option 2.
`JASUN\LGIM420D IMIDS-refs\PTO-SB-08 doc/mep
`
`ALL
`
`Dainippon Printing
`Co. Ltd.
`
`Fuji Denki Kagaku
`Kabushiki Kaisha
`Murata Mfg. Co. Ltd
`Anyquitous Co. Ltd
`
`ALL
`
`ALL
`
`{
`
`F6
`|gz
`
`JP-61-69811-U
`JP-6-267746-A
`KR-10-2008-0074640-A
`
`05-13-1986
`09-22-1994
`08-43-2008
`
`F1i5
`
`JPS-56-78415-U
`
`06-25-1981
`
`
`
`Page 921 of 981
`
`Page 921 of 981
`
`

`

`PTO/SB/08B (08-03)
`Approved for use through 07/31/2006. OMB 0851-0031
`U.S. Patent and Trademark Office: U.S. DEPARTMENT OF COMMERCE
`Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of information unless it contains a valid OMB
`control number.
`
`Application Number
`
`Filing Date
`November 23, 2016
`
`First Named inventor
`Jeong Wook An
`
`GroupArt Unit
`Examiner Name
`(use as many sheets as necessary)
`Attorney Docket Number|SUN,.LGI.420D1
`
`Substitute for form 1449B/PTO
`INFORMATION DISCLOSURE
`STATEMENT BY APPLICANT
`
`FOREIGN PATENT DOCUMENTS
`
`Foreign Patent Document
`
`Li
`
`F25
`
`TW-M424550-U1
`
`03-11-2012
`
`ALL
`
`
`
`
`
`
`
`
`
`
`P.
`Col
`ti
`ate
`1
`MN-DD-YYYY
`Applicant of Cited Document
`Rel
`F .
`Country Code?
`_- Number4 - King Code?(if known
`Initials
`No.
`of Relevant
`Figures Appear
`T?
`
`
`P|Fig g6.01-2011|Lcinnotek cota|aneCN-102083280-A
`
`||20|WO-2012150293-A1 11-08-2012 Scholz ef al. Pa
`
`
`||Far|JP-2011097534-A 05-12-2011|Tokai Rika Co.Ltd. re
`Taida Electronic Ind.
`F22
`JP-2009033106-A
`02-12-2009
`Co., Ltd.
`ALL
`
`||go|JP-2012019302-A 01-26-2012|NECTokincop.|ar|_|
`JP-2004110854-A 04-08-2004|Yokowoco, uta,|au]
`
`TDK Taiwan
`Corporation
`Hanrim Postech Co.,
`F26
`WO-2012008693-A2
`01-19-2012
`Ltd. et al.
`ALL
`
`||raz|CN-101924398-A 12-22-2010|_Zhongyoueta.|_alL_=|i
`[Pmearnsana[eS|
`
`F28
`JP-2012191134-A
`10-04-2012
`Co
`ALL
`
`F29
`
`
`
`JP-2008027015-A
`02-07-2008
`Ltd
`ALL
`
`
`
`
`NON PATENT LITERATURE DOCUMENTS
`
`
`
`
`Include nameofthe author (in CAPITAL LETTERS), title of the article,
`(when appropriate), title of the
`Examiner}Cite
`item (book, magazine, journal, serial, symposium, catalog, etc.), date, page(s), volume-issue
`Initials*
`No.
`'
`
`
`number(s), publisher, city and/or country where published.
`a
`Pf
`
`a
`ae OfficeAction dated November12, 2013 in JapaneseApplication No. 2012-238616.
`a
`pf European Search Reportdated July 1, 2014 in EuropeanApplication No. 12190583.0.
`
`
`
`pfre|OfficeAction dated October7, 2014 in JapaneseApplication No. 2012-238615. |
`
`Office Action dated November 11, 2013 in Korean Application No. 10-2012-0123375.
`
`R2
`
`R3
`
`Date
`Examiner
`Considered
`Signature
`if reference considered, whether or not citation is in conformance with MPEP 609. Draw line through citation if not
`Initial
`*EXAMINER:
`and not considered. Include copy of this form with next communication to applicant.
`* Applicant's uniquecitation designation number (optional). 2 Applicant is to place a check mark here if English language Translation is attached.
`This collection of information is required by 37 CFR 1.98. The information is required to obtain orretain a benefit by the public whichis to file (and by the USPTO
`to process) an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14. This collection is estimated to take 2 hours to complete, including
`gathering, preparing, and submitting the completed application form to the USPTO. Time will vary depending upon the individual case. Any comments on the
`amount of time you require to complete this form and/or suggestions for reducing this burden, should be sent to the Chief information Officer, U.S. Patent and
`Trademark Office, P.O. Box 1450, Alexandria, VA 22313-1450. DO NOT SEND FEES OR COMPLETED FORMS TO THIS ADDRESS.
`SEND TO:
`Commissionerfor Patents, P.O. Box 1450, Alexandria, VA 22313-1450.
`if you need assistance in completing the form, call 1-800-PTO-9199 (1-800-786-9199) and select option 2.
`
`in conformance
`
`JASUN\LGIM20D1\IDS-refs\PTO-SB-08.doc/mep
`
`Page 922 of 981
`
`
`
`Page 922 of 981
`
`

`

`Substitute for form 1449B/PTO
`INFORMATION DISCLOSURE
`STATEMENT BY APPLICANT
`
`control number.
`
`
`PTO/SB/08B(08-03)
`Approved for use through 07/31/2006. OMB 0651-0031
`U.S. Patent and Trademark Office: U.S. DEPARTMENT OF COMMERCE
`Under the Paperwork Reduction Act of 1995, no persons are required to respond to a collection of
`information unless it contains a valid OMB
`
`
`Application Number
`
`Filing Date
`November23, 2016
`
`First Named Inventor
`Jeong Wook An __
`
`Group Art Unit
`Examiner Name
`(use as many sheets as necessary)
`
`Sheet Attorney Docket Number|SUN.LGI.420D1| 5 | of
`
`
`
`
` NON PATENT LITERATURE DOCUMENTS
`
`
`Include name of the author (in CAPITAL LETTERS), title of the article, (when appropriate), title of the
`Examiner|Cite
`item (book, magazine, journal, serial, symposium, catalog, etc.), date, page(s), volume-issue
`Initials*
`Njo.
`publisher, city and/or country where published.
`
`
`
`Office Action dated December 21, 2015 in Chinese Application No. 201380026460.5.
`
`
`
`
`
`
`eeeee
`
`
`
`R5
`
`R
`
`10
`
`R
`
`11
`
`12
`
`
`
`
`
`
`
`
`European Search Report dated February 4, 2016 in European Application No. 13763524.9.
`
`international Search Report dated July 25, 2013 in International Application No.
`PCT/KR2013/002406.
`
`international Search Report dated July 26, 2013 in International Application No.
`PCT/KR2013/002412.
`
`Office Action dated August 10, 2015 in Japanese Application No. 2015-172306.
`
`Office Action dated August 24, 2016 in Taiwanese Application No. 103130766.
`
`Office Action dated June 2, 2016 in U.S. Application No. 14/387,521.
`
`Office Action dated June 29, 2016 in Chinese Application No. 201510084340.1.
`
`
`
`Date
`Examiner
`
`Considered
`Signature
`if reference considered, whether or not citation is in conformance with MPEP 609. Draw line through citation if not
`*EXAMINER:
`Initial
`and not considered. Include copy of this form with next communication to applicant.
`‘ Applicant's unique citation designation number(optional).
`? Applicantis to place a check mark here if English language Translation is attached.
`This collection of information is required by 37 CFR 1.98. Theinformation is required to obtain or retain a benefit by the public which /s to file (and by the USPTO
`to process) an application. Confidentiality is governed by 35 U.S.C. 122 and 37 CFR 1.14. This collection is estimated to take 2 hours to complete, including
`gathering, preparing, and submitting the completed application form to the USPTO. Time will vary depending upon the individual case. Any comments on the
`amount of time you require to complete this form and/or suggestions for reducing this burden, should be sent to the Chief information Officer, U.S. Patent and
`Trademark Office, P.O. Box 1450, Alexandria, VA 22313-1450. DO NOT SEND FEES OR COMPLETED FORMS TO THIS ADDRESS.
`SEND TO:
`Commissionerfor Patents, P.O. Box 1450, Alexandria, VA 22313-1450.
`if you need assistance in completing the form, call 1-800-PTO-9199 (1-800-786-9199) and select option 2.
`
`
`in conformance
`
`JASUN\LGI\420D1\IDS-refs\PTO-SB-08.doc/mep
`
`Page 923 of 981
`
`Page 923 of 981
`
`

`

`1
`
`SUN.LGI420D1
`
`DESCRIPTION
`
`WIRELESS POWER RECEIVER AND METHOD OF MANUFACTURING THE SAME
`
`CROSS-REFERENCE TO RELATED APPLICATIONS
`
`This application is a continuation of U.S. Application No. 13/663,012, filed October 29,
`
`2012, which claims the benefit under 35 U.S.C §119 of Korean Patent Application Nos. 10-
`
`2012-0029987, filed March 23, 2012, and 10-2012-0079004, filed July 19, 2012, which are
`
`hereby incorporated by referencein their entirety.
`
`10
`
`BACKGROUND
`
`The embodimentrelates to a wireless power receiver and a method of manufacturing the
`
`same. In more particular, the embodiment relates to a wireless power receiver used for wireless
`
`power transmission or an antenna to reduce a thickness of the wireless power receiver and to
`
`15
`
`simplify the manufacturing process thereof and a method of manufacturing the same.
`
`A wireless power transmission or a wireless energy transfer refers to a technology of
`
`wirelessly transferring electric energy to desired devices. In the 1800’s, an electric motor or a
`
`transformer employing the principle of electromagnetic induction has been extensively used and
`
`then a method of transmitting electrical energy by irradiating electromagnetic waves, such as
`
`20
`
`radio wavesor lasers, has been suggested. Actually, electrical toothbrushes or electrical razors,
`
`which are frequently used in daily life, are charged based on the principle of electromagnetic
`
`induction. The electromagnetic induction refers to the generation of an electric current through
`
`induction of a voltage when a magnetic field is changed around a conductor. The
`
`electromagnetic induction scheme has been successfully commercialized for electronic
`
`25
`
`appliances having small sizes, but represents a problem in that the transmission distance of
`
`poweris too short.
`
`Besides the electromagnetic induction scheme, the long-distance transmission using the
`
`resonance and the short-wavelength radio frequency has been suggested as the wireless energy
`
`transfer scheme.
`
`JASUN\LGI420D 1\Application\SUN-LGI-420D 1-Application.docx/whs/mhl
`
`Page 924 of 981
`
`Page 924 of 981
`
`

`

`2
`
`SUN.LGI420D1
`
`However,
`
`in general, a wireless power receiver disposed in a terminal has a thick
`
`thickness and the manufacturing process thereof is complicated.
`
`BRIEF SUMMARY
`
`An embodiment provides a method capable of remarkably reducing a thickness of a
`
`wireless powerreceiver by directly disposing a coil unit on a top surface of a magnetic substrate.
`
`An embodiment provides a method capable of ensuring high power transmission
`
`efficiency and enabling communication with external devices by directly disposing a coil unit
`
`and a near field communication antenna on a top surface of a magnetic substrate.
`
`10
`
`An embodiment provides a method capable of simplifying the manufacturing process for
`
`a wireless powerreceiver by directly disposing a coil unit on a magnetic substrate.
`
`An embodiment provides a method capable of remarkably reducing a thickness of a
`
`wireless powerreceiver by disposing a coil unit inside a magnetic substrate.
`
`An embodiment provides a method capable of ensuring high power transmission
`
`15
`
`efficiency and enabling communication with external devices by disposing a coil unit inside a
`
`magnetic substrate and a near field communication antenna on a magnetic substrate.
`
`An embodiment provides a method capable of simplifying the manufacturing process for
`
`a wireless power receiver by disposing a coil unit inside a magnetic substrate.
`
`A wireless power receiver according to one embodiment includes a magnetic substrate
`
`20
`
`and a coil configured to wirelessly receive power, wherein the coil is formed as a conductive
`
`layer on the magnetic substrate.
`
`A wireless power receiver according to one embodiment includes a magnetic substrate
`
`and a coil a coil configured to wirelessly receive power, wherein the coil
`
`is formed as a
`
`conductive layer at the magnetic substrate, wherein a part of the coil is disposed inside the
`
`25
`
`magnetic substrate.
`
`A method of manufacturing a wireless power receiver for wirelessly receiving power
`
`according to one embodiment includes forming a conductor on a protective film, forming a
`
`conductive pattern by etching the conductor, connecting a connecting unit to be connected to an
`
`external circuit to a connection terminal of the conductive pattern, obtaining a magnetic substrate
`
`30
`
`having a receiving space of a predetermined shape corresponding to the connecting unit and
`
`JASUN\LGI420D 1\Application\SUN-LGI-420D 1-Application.docx/whs/mhl
`
`Page 925 of 981
`
`Page 925 of 981
`
`

`

`3
`
`SUN.LGI420D1
`
`disposing the magnetic substrate on the conductive pattern while positioning the connecting unit
`
`in the receiving space.
`
`According to one embodiment,
`
`the thickness of the wireless power receiver can be
`
`remarkably reduced by directly disposing the coil unit on a top surface of the magnetic substrate.
`
`According to one embodiment,
`
`the high power transmission efficiency can be ensured and
`
`communication with external devices can be enabled by directly disposing the coil unit and the
`
`near field communication antenna on the top surface of the magnetic substrate.
`
`According to one embodiment, the manufacturing process for the wireless power receiver
`
`can be simplified by directly disposing the coil unit on the magnetic substrate only through
`
`10
`
`laminating and etching processes.
`
`According to one embodiment,
`
`the thickness of the wireless power receiver can be
`
`remarkably reduced by forming the conductive pattern inside the magnetic substrate.
`
`According to one embodiment, the high power transmission efficiency can be ensured by
`
`forming the conductive pattern inside the magnetic substrate and the communication with
`
`15
`
`external devices can be enabled by using the near field communication antenna.
`
`According to one embodiment, the connecting unit is disposed in the receiving space of
`
`the magnetic substrate so that the thickness of the wireless power receiver can be remarkably
`
`reduced as muchasthe thickness of the connecting unit.
`
`According to one embodiment, a tape substrate is used as the connecting unit so that the
`
`20
`
`overall size of the wireless power receiver can be reduced.
`
`According to one embodiment, a lead frame is used as the connecting unit, so the wiring
`
`layer included in the connecting unit can be protected from the heat, external moisture or impact
`
`and the mass production can be realized.
`
`According to one embodiment, the magnetic field directed to the outside can be changed
`
`25
`
`into the coil unit due to the conductive pattern formed in the magnetic substrate, so the power
`
`transmission efficiency can be improved, at the same time, the amount of the magnetic field
`
`leaked to the outside can be reduced so that the bad influence of the magnetic field exerted to the
`
`human body can be diminished.
`
`JASUN\LGI420D 1\Application\SUN-LGI-420D 1-Application.docx/whs/mhl
`
`Page 926 of 981
`
`Page 926 of 981
`
`

`

`4
`
`SUN.LGI420D1
`
`According to one embodiment, the wireless power receiver can be manufactured only
`
`through the processes of forming the pattern groove and inserting the coil unit, so that the
`
`manufacturing process can be simplified.
`
`Other various effects of the embodiments will be disclosed directly or indirectly in the
`
`detailed description of the embodiments.
`
`BRIEF DESCRIPTION OF THE DRAWINGS
`
`FIG. | is a perspective view illustrating a wireless power receiver 1000 according to the
`
`first embodiment;
`
`10
`
`FIG. 2 is a plan view illustrating a wireless power receiver 1000 according to the first
`
`embodiment;
`
`FIG.3 is a sectional view taken along line A-A’ of a connecting unit 300 of a wireless
`
`powerreceiver 1000 shownin FIG.2;
`
`FIGS. 4 to 8 are views for explaining a method of manufacturing a wireless power
`
`15
`
`receiver 1000 according to one embodiment;
`
`FIG. 9 is a sectional view taken along line A-A’ of a connecting unit 300 of a wireless
`
`powerreceiver 1000 shownin FIG.2 according to the second embodiment;
`
`FIG. 10 is a plan view illustrating a wireless power receiver 1000 according to the third
`
`embodiment;
`
`20
`
`FIG. 11 is a perspective view illu